20 Most Recent
GE Profile WPRE6100G Top Load Washer - Page 7 Questions & Answers
Vibrate on spin cycle
Most times this is a simple leveling problem. On bottom of all washers is little leveling legs, they turn out to raise and turn in to lower. Most the time as gravity spins, it is always better to have the front legs little higher the the back legs. Meaning have the back of washer a little lower then the front, it seems to carry gravity back and makes up for the gravitational force.
GE WPRE6150 -Shuts down
4 flashes = Overfill fault presure pipe blockedCheck for high
water pressure to unit, usually an indication of a bad water
inlet valve.Hope this helps; also keep in mind that your feedback is important and I'll appreciate
your time and consideration if you leave some testimonial comment about
this answer.Thank you for using Fixya, and have a nice day.
Washing machine won't spin
check the coupling between motor and the transmission it may be broke. if they break it will not spin. it is rubber to prevent a more serious problem. the cost is not that bad, well here in n.y.s anyway!
How long does it take to complete a wash cycle
Hello,
In a perfectly normal washer with decent incoming water pressure it should take 3-5 minutes to fill depending on water level size selected.
If what your experiencing is that your washer does fill yet it takes forever the problem is going to be with the water inlet valve.
GENE
Not finding what you are looking for?