20 Most Recent Technics SL-1200 Turntable - Page 8 Questions & Answers

Technics SE CA1080 Service Manual

there is a chip called an operational amplifier under a heat sink on the pcb,that fails when it get top volumed for two long theres regulators with heatsinks.
it is listed as,

Technics SE -CA1080 amplifier F61 fault,

Technics Audio... | Answered on Jan 31, 2019

Sorry to disagree but obviously everything has not been checked or the faulty internal component(s) or break(s) in the circuitry would have been discovered and replaced or repaired...

Technics Audio... | Answered on Jan 27, 2019

If your receiver has a subwoofer output, then it is simple. run an RCA cable from the subwoofer out on the receiver to the input on the powered subwoofer. If the subwoofer out is only a single plug then you can use a Y adapter. But, most powered subwoofers will work with only one side plugged in. Try that and if it's not working right.. then get the Y adapter.

Technics Audio... | Answered on Jan 20, 2019

Yes you should be able to loop through the RCA outputs into the RCA inputs on the back of the machine. However i see no reason to do so.

Technics Audio... | Answered on Jan 17, 2019

It is going into protect mode after 10 minutes of operation. You have to troubleshoot to find out whether component defects or cold solder joints are responsible.

Technics Audio... | Answered on Jan 16, 2019

verify the push-button.

Technics Audio... | Answered on Jan 14, 2019

New remote for around £12.

Technics Audio... | Answered on Jan 11, 2019

There was clearly something wrong with the tray mechanism and even though you have removed the disc, sensors on the tray are stuck in the disc in mode. This will require some examination of the tray mechanism to determine the damage to it and what needs to be done to fix it.

Technics Audio... | Answered on Jan 11, 2019

Try eBay, we do not really recommend products.

Technics Audio... | Answered on Jan 03, 2019

Can you plug in headphones and if so do you hear anything.

Technics Audio... | Answered on Jan 01, 2019

Use RCA cords and place between the turntable and amp. The amp is clearly labeled PHONO.

Technics Audio... | Answered on Dec 31, 2018

I searched the internet using https://www.google.com for this vintage receiver from many years ago.

Please click on the word, Download, on the internet link below:


Technics Audio... | Answered on Dec 29, 2018

Not finding what you are looking for?
Technics SL-1200 Turntable Logo

Popular Tags

116 questions posted

Ask a Question

Usually answered in minutes!

Top Technics Audio Players & Recorders Experts


Level 3 Expert

5686 Answers

Ben Armstrong

Level 2 Expert

360 Answers

The Knight
The Knight

Level 3 Expert

76115 Answers

Are you a Technics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Technics Audio Players & Recorders

  • Technics Audio Players & Recorders

Most Popular Question

just purchases technics 1200 turntable

  • Audio Players & Recorders