20 Most Recent Technics SL-1200 Turntable - Page 10 Questions & Answers

It has a new { ? } original one but only {moves} a {Little} to both {sides}? Technics SL-MC410 CD changer manuals https://www.hifiengine.com/manual_library/technics/sl-mc410.shtml

Check the audio settings on the PC, sometimes different inputs require different settings. There should be input setting alternatives in the audio section in the control panel on your PC.

Hi Asad, I'm sorry to tell you that SL dv280 and SL dv290 are not compatible, they have the same connector, but different signal configuration Do not try to test, because you could damage the devices To work well, you must replace all of the devices with those of line 290 Regards Franco Dosil Hola Asad, lamento decirte que no son compatibles el SL dv280 y el SL dv290, tienen el mismo conector, pero distinta configuracion de se?ales No intentes probar, porque podrias perjudicar los aparatos Para que funcione bien, deberas reemplazar la totalidad delos aparatos por los de la linea 290 Saludos Franco Dosil http://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Technics-SLDV-280-GN-Service-Manual.pdf https://elektrotanya.com/technics_sl-dv290_sm_html.rar/download.html

Hi Anonymous, you have two ways to connect the Technics SL PD7 CD player to the Technics SA-DX750 The first is through a fiber optic cable, from the Digital Optical output of the SL-PD7, to Optical Input 1 or Optical Input 2 The other alternative is to use a 2 RCA to 2 RCA cable and connect them between the L and R outputs of the SL-PD7 to the CD L and R inputs on the SA-DX750 I hope you can interconnect the equipment Regards Franco Dosil Hola Anonimo, tienes dos maneras de conectar el reproductor de CD Technics SL PD7 al Technics SA-DX750 La primera es a traves de un cable de fibra optica, desde la salida Digital Optica del SL-PD7, hasta la Entrada Optica 1 ? Entrada Optica 2 La otra alternativa es usar un cable de 2 RCA a 2 RCA y conectarlos entre las salidas L y R del SL-PD7 a las entradas L y R de CD en el SA-DX750 Espero puedas interconectar los equipos Saludos Franco Dosil https://www.manualslib.com/manual/169257/Technics-Sa-Dx750.html http://www.usersmanualguide.com/panasonic/compact_disc_changer/sl-pd7

https://www.manualslib.com/manual/1138062/Technics-Sx-Kn1000.html ++

https://www.manualslib.com/manual/1353359/Technics-Su-V303.html ++

No, You need phono preamp.

Absolutely ,without problems

Hi David, I sent you a link where they are offering the hinges for the cover of your SL1900 Hope this can help you Regards Franco Dosil Hola David, te envio un link donde estan ofreciendo las bisagras para la tapa de tu SL1900 Espero que te sirva Saludos Franco Dosil https://picclick.com/Technics-SL-1900-Turntable-Parts-Dust-Cover-Hinges-283088513741.html https://www.vinylengine.com/turntable_forum/viewtopic.php?t=93307

Hi Les, as a first step, I would disconnect the speaker cables in the Technics su-x501 and test if the same thing happens, if so, there could be a problem with the power supply or also with the speaker output If it does not turn off, then I would start checking the speaker cables, along the way, in case there is any peeling, which could cause overheating Once the cables were checked, I would connect the speakers one by one and test with each new reconnection until the source of the fault was detected I hope you can solve the problem Regards Franco Dosil Hola Les, como primera medida, desconectaria los cables de los bafles en el Technics su-x501 y probaria si pasa lo mismo, si es asi, podria haber problema en la fuente de alimentacion o tambien en la salida de parlantes Si no se apaga, entonces comenzaria a revisar los cable de los bafles, en su recorrido, por si hay alguna peladura, que podria generar un recalentamiento Una vez revisado los cables, iria conectando de a uno los parlantes e iria probando con cada nueva reconexion hasta detectar el origen de la falla Espero que puedas resolver el problema Saludos Franco Dosil https://elektrotanya.com/technics_su-x501_sm.pdf/download.html https://elektrotanya.com/technics_su-x501_sch.pdf/download.html

Hi Thomas, as you say, it's not the engine, nor the integrated engine Most likely, the pitchel potentiometer that generates the problem I would try to clean it, applying a small amount of contact cleaner and test if there are improvements Keep in mind that it is the Pitch potentiometer that is changing the speed Comment if the suggestion served Regards Franco Dosil Hola Thomas, por lo que comentas, no es el motor, ni el integrado del motor Lo mas seguro es que el potenciometro de pitch el que genera el problema Yo intentar?a limpiarlo, aplic?ndole una peque?a cantidad de limpiador de contactos y probar?a si hay mejoras Ten en cuenta que es el potenciometro de Pitch el que va modificando la velocidad Comenta si sirvi? la sugerencia Saludos Franco Dosil https://www.manualslib.com/manual/387776/Technics-Sl-1200mk2.html

It sound like the main power amp has failed. Look at whatever is on the big heatsink as to the cause. As with any device from "friends" it could be that someone has tried to fix a fault and made a mess. So look carefully at the soldering to any of it's parts.