Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) - Answered Questions & Fixed issues

you should reboot the router and computer. also, check the connection. may be your router is not working fine. https://www.askprob.com/forums/topic/why-is-my-belkin-router-not-working

This model printer has only an USB printer connection and normally connected to a computer or laptop.
To connect this printer wirelessly to all laptops on your wireless network there are a couple of methods.
Connect the printer to a desktop computer and setup the printer as a shared printer. Next connect the desktop computer to your wireless router with a LAN cable and then configure the wireless laptops to connect to the shared printer on the desktop computer. NOTE - This desktop computer and printer must be on at all times for the wireless laptops to print to the printer.
OTHER METHOD
Connect the printer to an USB print server and connect the print server to the wireless router with a LAN cable. The printer drivers needs to be installed on all the wireless laptops and then the printer port needs to be deleted from the USB port and a new IP address printer port installed. This IP address will be the IP address of the print server.

1 800 2BELKIN x2263

you may install the belkin router by following the instructions given below. 1. Connect your modem to the internet port of the router. 2. Connect your router to the computer. 3. now reboot the modem and computer. 4. open the router setup page, and click on detect the internet connection. 5. now follow the instructions to install the belkin router. for more information you may follow the instructions given below. How To Setup Belkin Router Install Belkin Wireless Router Fixotip

That's about par for the course. This happens most everywhere and it needs to be reset. Upsetting I know, but most everyone has to deal with the same thing.

Well you can try to contact to belkin tech support and ask for online assitance hope they will fix your problem and you will be good to go.

maybe instead of nat, set you xbox as a DMZ host. This would be done on the router itself. It will allow the Xbox to bypass the firewall and nat on the router/gateway, and at the same time keep your computer safe.

Under System Settings on the Router: Extend the time of the "Time Out" or inactivity under NAT or, if that option is not available, then turn NAT off.

Normally, routers come with a software wizard that will help you set up your wireless and security settings. If this is not the case, you will need to do it manually.
First, you will need the IP of the router. Sometimes it's listed on the bottom of the device, sometimes it's in the manual, sometimes both. If you still cannot find it, try searching for 'defaul ip for XXXXXXX' where x is your router's modle number.
Then, go into IE (or Firefox, Chrome, Safari etc.) and type the IP into the address bar.
It may ask you for a user name and password. Most times the user name is admin and the password is either admin or there is no password.
Since I don't know your exact modle, you will need to do some searching through the web portal (created by your router that you connected to with the IP) for wireless security settings.
Use something like WPA for your encryption method, or WEP if you don't have WPA. Then just give the router a pass key that you will remember.
Save the changes, and you're done.

here is the manual scroll to page 30 https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&ved=0ahUKEwin4MmzpvLKAhUY52MKHaMkCpIQFggtMAM&url=http%3A%2F%2Fwww.belkin.com%2Fsupport%2Fdl%2Fp74880-d_f5d9230-4_manual.pdf&usg=AFQjCNFrNdXQlu0nmAyrEarK26fxGZSVkQ&sig2=gK2YzsQHD0Eb0tSiWET36Q&cad=rja

do you have cordless phones running on 2.4 Ghz ? try changing the channel number setting on the router from auto to use at least 2 channels higher than auto was using.

I had the same problem before I noticed my address bar kept adding a / after I would type the IP address so I had to make sure I hit the delete button after typing it in. Not sure if that's what you're experiencing or not. Might need to do a factory reset by pushing in on the little red button in the back for 10 seconds. I made a video showing all this with my F9K1003V1

You should access your router's setup using your Installation CD and follow the required steps.

Hi, Do you have a computer that is connected to the wireless network ? If yes, Heres how to get the password.

Find your password on a Windows PC

If you have a computer running Windows that is connected to your wireless network, you can find the password by doing the following: Windows 8.1: Find your password Step 1: Swipe in from the right edge of the screen, and tap Settings. (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Settings.) Step 2: Tap or click the network icon ( or ) for the network you want to connect to, and then tap or clickConnect. Step 3: Swipe in from the right edge of the screen, and tap or click Search. Step 4: In the search box, enter view network connections, and in the search results tap or click View network connections. Step 5: In the Network Connections window, press and hold or right-click the network name, and then tap or clickStatus. Step 6: Tap or click the Wireless Properties button. Step 7: Tap or click the Security tab, and tap or click the Show characters check box. Step 8: The password for the wireless network is displayed in the Network security key field. Windows 8: Find your password Step 1: From the Start screen, swipe in from the right edge of the screen, and then tap Settings. (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Settings.) Step 2: Tap or click the wireless network icon . Step 3: Tap and hold or right click on a wireless network name, and then choose View connection properties. Step 4: Select Show characters to see the wireless network password. Windows 7: Find your password Step 1: Click the wireless network icon on the taskbar (lower-right corner). Step 2: Right-click your wireless network name, and then select Properties. Step 3: Select Show characters to see the wireless network password. Hope this helps Regards Rakesh Warrier facebook.com/quietmouse89

Cut as in cut and paste

connect your computer to the router via ethernet cable and then open the router setup page on your computer. once you will do that after that you need to click on the wifi security . and now you will get your password here .

1.Yes, you have to save the configuration of the old router to see where you have it .
(print this out so that you understand the configuration.)
2. Uninstall the software for the old Belkin router.
3. Connect the new Belkin to the computer
4.power the computer off / leave off for (2) minutes then turn on.
5. Run new installation software on the new Belkin router.

The naming convention for version updates is 3.00 for ver 3 and 3.10 for ver 3.1 You are updating to 3.1 not 3.0

Here is the link to the router manual. Page 12 gives the loation of the WPS button. http://cache-www.belkin.com/support/dl/p74880-d_f5d9230-4_manual.pdf

you need to use ethernet lead from router to pc this will connect you direct. right click on router icon open web page enter admin into username and password then change your settings