Top 20 GE MiniCam Pro HO98756 Webcam Questions & Answers

www.jascoproducts.com/support/download-files/98756.zip

1st You download Webcam Driver.It was a gift with no cd for installationAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.

Go to the manufacturers website. You should be able to download the correct XP drivers from there.

1st You download Webcam Driver.Says I dont have the vfw driverAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.

1st You download Webcam Driver.Cant find the driverAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.

click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or select

the voice tab and make sure that you have the right media selected also select volume make sure the box for microphone has a tick in it hope it helps

1st You download Webcam Driver.WEB CAM DRIVERSAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.

henry

1st You download Webcam Driver.Ge minicam pro 98067 driversAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.

Can't you rotate the ring around the lens to focus it.If it does move sometimes you have to rotate it quite a few times left or right.

Hello, Mike!You can find all GE drivers for computer accessories following this link:http://www.jascoproducts.com/support/software-downloads.asp1. Follow the link I provided2. If you are running Vista or Windows 7, then choose "For Windows 7 & Vista drivers" option; if running Windows 95, 98, 2000 or XP, then simply choose "PC Cams" option by clicking on it.3. Find your product on the list provided and click to download. The file is .zip, so you will have to unzip it, and then install.I hope you will find this solution useful.Thank you for contacting me.Best regard!Hajrija Cobo

Hi bpace33

GENERAL ELECTRIC MINICAM PRO HO98756 WINDOWS 7 WEBCAM DRIVER

You can download the Windows 7 Drivers for your webcam by clicking on the link below and scrolling to the lower half of the page. If you select the "save" download option and select "desktop" as the download destination, you can download the setup files and save them somwehere for if you should ever need to reinstall the drivers again at some point in the future.

http://www.jascoproducts.com/support/software-downloads-win7.asp

A PDF Manual is also available for download for this webcam
.
Please note that, for some webcams, it is better to install the drivers and capture software first and then connect the camera afterwards.

If you have previously installed the drivers and software with the camera connected, disconnect the webcam > uninstall all components of the webcam drivers and software > restart the computer > reinstall the webcam drivers and software > restart the computer > reconnect the webcam > Computer > right click on the camera icon at the bottom of the window (scroll down if necessary)> Send To > Desktop (create shortcut) > double click on the new desktop webcam icon.

I hope this helps.

If this Answer goes some way towards helping to resolve your Query, Problem or Fault, please take the time to Rate it. Doing so helps Solution Providers, like me, better understand the needs and the point of view of Askers, like you, and guides us in exploring the best ways to provide the most comprehensive, useful and high quality Responses and Solutions we can. If you need further help, please do not hesitate to post another Question or add a Comment to this Question.Thanks for using FixYa.

Hello!
Try one of these drivers-find your model and download.

http://www.jascoproducts.com/support/software-downloads-win7.asp


If your Operating System is Windows 95, 98, XP, 2000, use the link above and scroll down to cameras; If your Operating System is Windows 7 or Vista, download from this link:

http://www.jascoproducts.com/support/software-downloads-win7.asp

Regards!

Hello!
Your webcam is not compatible with Mac. It requires Windows XP, 2000, ME, 98SE.
I would still recommend you to try updating the driver:

• Start>right-click Computer>Properties>Device Manager
• Find your camera in the list and right-click on it>choose Update and wait for the update process done
• Restart computer and check if your camera works
• If not, go to Device Manager again and see if there is any driver marked with yellow exclamation mark sign; if yes, right-click on it>Uninstall; go to the top and click scan for hardware changes-this should scan the changes and run installation wizard automatically, so then just follow instructions.
• You will probably need to restart again
  

If that doesn't work, try one of these drivers:
http://www.jascoproducts.com/support/software-downloads.asp

Regards!

Visit the below link for the driver.
Answer it Bid http://www.jascoproducts.com/support/download-files/98756.zip

Vote if u find this useful.

Copy this site and paste it in your web browser and hit ENTER to download GE Mini Webcam Drivers

http://www.jascoproducts.com/support/software-downloads.asp

Then do this:

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera's have to be setup on the program they are to be used with. Just installing the
camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

Hello nikki_silver,
The best thing to do in this situation is a System Restore.
To perform a "System Restore.
" Follow these instructions carefully, and you will have no problem at all.
The first thing you want to do is click on the "Start Button," from the Desktop.
Next, click on "All Programs," scroll to find "Accessories," next select the "System Tools.
" You will see in the next window that open, "System Restore!



"Now this is very important!
Once you click on the System Restore "shortcut" it will start to look for the last known time of a change in your computer.
The System restore can take as long as a 1/2 an hour to run, so be patient.
"Do not try to do any type of work, don't even touch the keyboard for any reason,
just let it run!"
Once the System Restore finds the correct "Date and Time"of the event;
choose the Date closest to the time of the occurrence.
In your case it will be the deletion of the "Webcam."

.

Now once again, there will be a message telling you not to do anything with the computer,
and please don't.
The System Restore will "run" for a while, so once again be patient.



The computer will then "Shutdown and Restart."
Lo-gin if you have to; but!
Do not touch the Keyboard once the Desktop window open, because System Restore is still running.
Wait! Until there is a message letting you know the Restore of your System was successful!
Take your time.
"I hope all goes well, please let me know if you need further assistant.
Best Regards.
Thanks for using Fix'Ya."

1st You download Webcam Driver.I bought this minicampro andAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.

check on the hardware profiles..if your webcam is detected..if there is a question mark try to install it manually..

You can find it here