Pyle PLTDN71 Car Video Player - Answered Questions & Fixed issues

I do believe u ground it or you can also google Pyle bypass codes and totally do away with the whole brake safety option

Check Batteries

the slider peice

check that you haven't connected the power wire to the light power make sure its straight from the battery and straight from switchable power

pls rate

check your ground power remote and parking switch

red-power(keyed), yellow-power(constant), black-ground. If you're having problems installing it, try powering it on with your'e car battery, if that works you have a blown fuse in the system.

i'm not sure what part is broken from your description but i will try to help...

you can purchase something called a reverse harness that looks identical to your vehicle's OEM harness that plugs into the factory radio. the only difference will be the wiring color on the new harness will be standard aftermarket wiring (ie 12volt yellow, ign red, ground black, etc.) and if you cut each wire from the OEM harness and solder it to the reverse harness location for location then the new harness will be good to go. i would personally do this as a single wire at a time so you are not staring at 16 cut wires going to the new harness. check at Best Buy and see if they carry the 71-1770 Metra wiring harness and that will be the one you need as the reverse harness and if you are installing an aftermarket radio get the 70-1770 also. if you aren't comfortable with all this your local installers should be able to do this job for you pretty reasonably.

u probably connected ur power or constant to ur lights. if ur lights turn on ur accesry switch and than ur ight if ur stereo turns off thanu have tosee witch wire is connected wrong

bad wiring on the ignition its hooked to the constant and ur brake wire is not properly connected

this is on a website link let me try to find it its a wire buddie had same issuue

yes. the probs you bought a pyle. lol. the speakers were good back in the days but the electronics really suck and thus you get prlike you do BUT it seems like your installation technician did something wrong. once you turn your car off the unit should shut off. its probably hooked up to a negative ground or wrong wire.take it elsewhere before your car burns.

The user instructions explain how to tune it in. https://www.manua.ls/pyle/psbv200bt/manual?p=4

See the instructions on user manual Pyle PWMA230BT Operating Instructions (Page 3 of 4) ' ManualsLib

install to what vehicle/sound system. What is the current sound system? does it have the provision to install a subwoofer?

Not available anywhere. Contact the maker direct. https://www.google.com/search?q=PYLE+PPHP1537UB+wiring+diagram ..

Contact Pyle directly to request the information.

Question moved Pyle computers to Pyle Car Audio. Contact Pyle direct with a view to a free repair. This is a Marine Radio and should be rugged.

Marine Bluetooth CD/MP3 Radio Receiver PLMRB39W ...

https://pyleusa.com > products > plmrb39w ... memory card readers with aux (3 5mm) input connector jack to connect and stream audio from external devices. Sku: PLMRB39W. Vendor: Pyle. Ask a Question. https://www.google.com/search?q=pyle+plmrb39w+turns+off+by+itself ..

Anything can be fixed. All you need is the expertise and components.

You could see if the companies official website has anything that can help you out.www.helpowl.com