Top 20
Pyle PLTDN71 Car Video Player Questions & Answers
Pyle PLD70BT wiring to brake
I do believe u ground it or you can also google Pyle bypass codes and totally do away with the whole brake safety option
Broken wire in wire harness clip
i'm not sure what part is broken from your description but i will try to help...
you can purchase something called a reverse harness that looks identical to your vehicle's OEM harness that plugs into the factory radio. the only difference will be the wiring color on the new harness will be standard aftermarket wiring (ie 12volt yellow, ign red, ground black, etc.) and if you cut each wire from the OEM harness and solder it to the reverse harness location for location then the new harness will be good to go. i would personally do this as a single wire at a time so you are not staring at 16 cut wires going to the new harness. check at Best Buy and see if they carry the 71-1770 Metra wiring harness and that will be the one you need as the reverse harness and if you are installing an aftermarket radio get the 70-1770 also. if you aren't comfortable with all this your local installers should be able to do this job for you pretty reasonably.
Can some1 please tell me how to connect all the
red-power(keyed), yellow-power(constant), black-ground. If you're having problems installing it, try powering it on with your'e car battery, if that works you have a blown fuse in the system.
Brake bypass
this is on a website link let me try to find it its a wire buddie had same issuue
WILL NOT TURN OFF!
yes. the probs you bought a pyle. lol. the speakers were good back in the days but the electronics really suck and thus you get prlike you do BUT it seems like your installation technician did something wrong. once you turn your car off the unit should shut off. its probably hooked up to a negative ground or wrong wire.take it elsewhere before your car burns.
Not finding what you are looking for?