Logitech (980158) Headset - Page 6 - Answered Questions & Fixed issues


I have a Schwinn 270 recumbent exercise bike. I was able to Bluetooth pair it to an Android phone using code 000000, but it was a useless pairing without the Schwinn app or an exercise app, and it did not offer an audio link.

Radio... | Answered on Apr 17, 2019 | 1,498 views


Please check if the pairing mode is ON in your Bluetooth earpiece.
Kindly share more details of the steps that you follow on your tablet & Bluetooth earpiece.

Radio... | Answered on Apr 09, 2019 | 41 views


I have attached a copy of the BH-M20 instructions which cam with mine
bh-m20_headphones-5bjwr13p33wfelkhuc4rnxz1-2-0.jpg

Radio... | Answered on Apr 09, 2019 | 1,034 views


Sounds like it is displaying the transmit and receive channels. check your manual on how to change transmit/receive channels or frequencies.

Radio... | Answered on Apr 08, 2019 | 174 views


The most common codes are 0000 or 1234. Try those. newer devices do not require a code.

Radio... | Answered on Apr 08, 2019 | 69 views


If the bluetooth you are referring to is a bluetooth earbud, the batteries may be dead. You may need to buy a new earbud.

Radio... | Answered on Apr 08, 2019 | 79 views


Read the manual on your stereo. It should have information on how to pair bluetooth to help.

Radio... | Answered on Apr 08, 2019 | 75 views


That is a complicated question. Are you wanting to change the transmitter bluetooth module or the receiving one (usually an earbud or headphone.). Basically to change those settings you will need to connect and FDDI to UART module to your bluetooth module at the RX and TX pins and connect the FDDI to UART usb port to your computer usb port, then open up a terminal program, connect to the Bluetooth module via the FDDI/UART module. A terminal program such as CoolTerm can help you do that. You might also read bluetooth module information on SparkFun for more help.

Radio... | Answered on Apr 08, 2019 | 73 views


Try going to another location. If the batteries are still on and your old headset is nearby, it may be blocking your device from "seeing" the new headset because it is connected to your old headset which is lost but near by.

Radio... | Answered on Apr 08, 2019 | 68 views


You will need to tell us more. What model radios are you using? Can you hear others talking but not your friend with the other radio? If you can hear other talking, the problem my be a defective transmit circuit on the friends radio. If you can not hear any one, you may a a defective receiver or broken antenna. Can the other person hear you?

Radio... | Answered on Apr 08, 2019 | 58 views


It sounds like the batteries are dead. If that is the case, you will need to replace the batteries. Is that possible with your headset or are they built in? The other thing that may be happening is your charger is dead. Try using a different charger and see if the headset charges. Lastly, your charge cable may be defective and needs to be replaced.

Radio... | Answered on Apr 08, 2019 | 57 views


The static tells me that your audio chip is working, but the stages ahead of that are not feeding a signal to the audio amplifier. The intermittent receive sounds like a bad antenna connection, or bad contacts on your transmit - receive circuits. I don't know the Cobra 29 LXBT circuitry, but likely a relay is switching between transmit and receive when you press the mic key. You could try connecting your antenna to the pins on the relay that carry the rf signal to the receiver circuitry. If you suddenly starting picking up signals, you know the switch is the problem, as you have by passed the switch momentarily. Don't try to transmit in this condition.

Radio... | Answered on Apr 08, 2019 | 54 views


Often the yellow wire is for the clock to keep the clock running even if the radio is turned off. It is not meant to power the entire radio. The yellow wire is usually always on even if you turn off the key switch. You also need to have a ground or negative terminal connected to the radio, and also a 12 volt positive wire that is switched on and off by your key switch. The color of this wire is often red, but could be other colors depending on your vehicle.

Radio... | Answered on Apr 08, 2019 | 64 views


Yes!

Radio... | Answered on Apr 08, 2019 | 41 views


monaural as opposed to stereo

Radio... | Answered on Apr 07, 2019 | 47 views


'tis better to give than receive...

Radio... | Answered on Apr 07, 2019 | 38 views


How to reset my Whistler ws1010

Radio... | Answered on Apr 07, 2019 | 747 views

Not finding what you are looking for?
Logitech (980158) Headset Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Logitech Radio Communications Experts

Ekse

Level 3 Expert

13434 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Are you a Logitech Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...