20 Most Recent Jabra BT125 Headset - Page 7 Questions & Answers

you have to switch the bluetooth headset to pairing mode not just swithcing it on. Hold the power on button continuously even after it switches on then the light will remain on. Then you switch on the bluetooth in the mobile and start searching for bluetooth devices. You will find your bluetooth headset in the mobile. Select it and pair. Usual code will be 0000, but it might differ check with the manual which can be found online too. This will definitely solve your problem.

hold down the button till the light turns solid blue, then let the phone already in bluetooth mode find the jabra, it will ask for a password, enter 0000

Most factory default bluetooth passkeys are "0000" try that, hopefully it's not a odd out of the millions made, and should work for you.

I've had similar audio issues when my Motorola V310 was low on battery and also when the Jabra BT125 was low on battery. Recharging helps but if not possible, redialing seems to do better.

Mine is a Blackjack II, but i did get it to connect. Hold the clear button down on the Jabra until it lights solid blue, keep holding it with one hand while you use the other hand to operate your Blackjack. I went to Settings, then Connections, then Bluetooth, then "Add new device". As long as my Jabra was lit solid blue, the phone found the headset. Then it will ask you for the pin code, which i found by accident (0000 - four zero's).

default should be 0000
methinks
try it

try a different charger sometimes they go dead.if that dosent work then your jabra is dead

Correction to the above note...

You can connect your Jabra 125 to your computer's audio output and listen to music via the ear piece. You need to make the adjustments in the control pannel. Set the audio/sound output to the blue tooth. You also need to sync the earpiece to the pc via a dongle or bluetooth adapter on the pc. Works great...

Jimmy
www.CLSONLINE.org

Turn on your BT125 by presiing button for 4-5 secs
in ur dopod go to settings>communication>blutooth
In the mode tab:check on > turn on bluetooth and >make device visible to others
Then go to devices tab: click on add new devices, your dopod will start searching nereby bluetooth devices...during this time press the button on your BT125 for about 2 secs, it will try to connect to dopod and a message will be displayed : "BT125 wants to connects......" say yes ...it will ask for the passkey enetr 0000 and there you go ...tada

Turn ON the bluetooth headset (keep the button pressed for few seconds) and bluetooth connection of your Nokia phone. Search for the device from your phone, when found enter the pass key "0000" (its default) when prompted, set this device as authorized to pair it.

you order new ear pieces from jabra, cost ya a few bucks for 5 or so.

the headset stick does not come new ...you have to purchase full headset...thank you

Pass keys for bluetooth pairings are usually 0000 unless the item is user configurable and the user changes it to improve security. I do not believe that headset is configurable so 0000 should work just fine.

just hold the power button till it pairs

Sorry that can't happen you would haft to by a newer kind

Hi,


1. I have the Jabra 125. You can get the manual at www.jabra.com if you have a different one. 
2. Turn off your phone. Power off. The order of powering on devices is the key. 
3. Press and hold your Jabra power button until it's glowing blue (not flashing blue light--but constantly on) 
4. Then turn on your phone...and look for wireless devices in your phone menu. 
5. Make sure you have bluetooth turned on.
6. the phone will find the Jabra, and then will ask to pair with it. passcode is 0000. 
7. That's it. 

Again, the key is the order of turning on devices.

Thanks.

Here is a link to a page with links to your instruction manual.

http://www.jabra.com/Sites/Jabra/na-us/Headsetsupport/Pages/JabraBT125.aspx

Hi,

Try 4 zeros = "0000"