20 Most Recent EnGenius EOC-3220 (EOC3220) - Page 7 Questions & Answers

you will have to open up your network connections click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red x or a yellow exclamation or question mark you will need to update or install the driver or it could be firewalled click start control panel administration tools computer management device manager look for network adapters + expand Ethernet driver if you see a yellow question exclamation mark or a red X you will need to update/reinstall the driver for the device make sure you Ethernet/internet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys scroll to intergrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its enabledimake sure its enabledPci device arrows key scroll to nstalled if you computer came with a motherboard disk the driver could be on it or this disk provided by your ISP provider Internet Service Provider or you might have to download one http://download.cnet.com/sp37439-exe/3000-2112_4-207550.htmlhope it helps

If it is brand new, the default IP is 192.168.1.1, the username is admin and the password is admin.

Go to the router and reset it.
To reset it, press and hold the reset button on the router for 30 or more seconds.
The default username is admin, and the password is admin. To configure settings for your router, visit 192.168.1.1. on your browser.


Please don't forget to rate my solution, thanks.