20 Most Recent
Denon AVR-687 - Page 4 Questions & Answers
I need to set up
Okay! all ceiling mounted speakers. I don't know about 4 pair of speakers.Here is the load down:
First pair of ceiling speakers would be left and right front from speaker A or Main output behind your receiver.
Second ONE,but a pair would be connect to the center channel output as your center speaker.
Another pair would be connect to the surround sound left and right(NOT surround BACK left/right.)
Now,you have 5 channel setup at this point,you still need to purchase a power subwoofer to the SUB PRE-OUTPUT behind your Denon receiver.
For Zone two,you would need to connect your other pair of speakers to surround BACK left and right output.
Go to your Denon MENU button,depending on which model you have,some of them will have an on-screen display feature(you would need to have a composite video cable connect from the video output behind your receiver to the TV video input in order to use the on screen menu.)If not,you would have to it view on the front panel of the A/V receiver.
You need to read the detail on how to setup the video and audio as well as distance and DB for the receiver through the menu button.
I will be frank with you,if you are an amateur,Denon is NOT easy to be setup on the first time.
solutiondoct
Denon AVR-X2400H Intermittent Protection Mode on startup
The clue I think is the fact the problem gets worse after being switched off. One cause could be leaking capacitors, the big ones in the the power supply. They hold a charge, but if they leak the charge is lost and they do that when the power is off. The only other I can think of is a voltage regulator. But I think that would blow a fuse. So I would get your guy to replace the caps.
How to hook up a ADC equalizer to a Denon receiver.
Being that most AVRs designed today no longer provide a Pre-Out and Main Amp In that work in conjunction, there's no easy way to loop an external EQ through the receiver for playback with all sources. Also, given the fact that most receivers designed today either include some type of room correction software (Audyssey) or a Manual EQ for internal equalization, there is less of a need to integrate an external EQ with your receiver.
No sound DENON AVR-X1500H
Are the lights in the unit still working? If not it is a power issue. A lot of the vintage gear has a fuse inside that is not user replaceable. It could be the sensing circuit or an overload relay failure too. Unless you know electronic repair, have parts suppliers available and the equipment to service it, you are going to have to send it in
Not finding what you are looking for?