Ranger TR-696F SSB CB Radio - Answered Questions & Fixed issues


think cheap.first change the mic to see if that makes a difference. If it does you now have a new mic and a radio that works.Now it gets a little more expensive. you have to open the radio so the components show . Now ask yourself which one does what ? I know you can't answer it because if you could you wouldn't have posted this. I can tell you that its in your audio circuit . Now take it to a tech and have them fix it.

Ranger TR-696F... | Answered on Feb 23, 2015 | 82 views


check the obvious first. Is the mic plugged in and tightened all the way. Yes , take the bottom cover off and turn up the variable closest to the small transformer. Thats the modulation variable and the modulation transformer. If you still have a problem take it to a tech and let him fix it .

Ranger TR-696F... | Answered on Feb 23, 2015 | 52 views


I'll take it. just ship it to me .

Ranger TR-696F... | Answered on Oct 30, 2013 | 57 views


This is not normal. Either you are magnetic, or you have some kind of RF reflecting off you. Or something like that. This is strange to me.

Ranger TR-696F... | Answered on Aug 01, 2011 | 41 views


adjust L20 (AM) L21 (USB) L22(LSB)

Ranger TR-696F... | Answered on Jul 03, 2011 | 131 views


hello what seems to be the problem can you be more exact

Ranger TR-696F... | Answered on Mar 26, 2011 | 99 views


is the meter good?

Ranger TR-696F... | Answered on May 01, 2010 | 62 views


If you have no channel display or CB operation, it sounds like a blown voltage regulator that supplies power to the CB PLL circuit.

Ranger TR-696F... | Answered on Sep 26, 2008 | 227 views


If you are using the radio on a boat, then no, the grounding does not matter that much. However, an SSB transceiver would be hassle to install on a boat because of the amount of power they use to transmit. If the transmission is bad, try using the radio's internal tuner instead of the separate tuner. This may help improve the quality of transmit, however, some radios have a tough time clarifying incoming and outgoing signals and create a garbled sound when it receives a signal or when it transmits. If that doesn't work, then you can try grounding. But if you want a radio that doesn't require all this nonsense tning, you might want to think about investing in a Yaesu. They are pricey, but are one of the best HAM radios.

Ranger TR-696F... | Answered on Sep 07, 2008 | 202 views


check out the schematic first .It may be the same wiring .

Ranger Radio... | Answered on Oct 03, 2018 | 396 views


Your radio needs an alignment to bring it back to specs . Check all the frequencies according to the manual and have a tech tune it for you .

Ranger Radio... | Answered on Oct 03, 2018 | 145 views


If you want to talk on AM put it on AM if you want to talk on SSB then put it on SSB. Did you recently purchase this radio? You do realize you need a ham radio license to use this ?If you are on the upper ham bands you better have a license or they will come and get you .Look at the the dial that has 1 - 7 on it. Now take the owners manual and look at the diagram of the knob . It should say something about frequencies and the frequency you need to operate on is from 26.965 to 27.405 MHZ .

Ranger Radio... | Answered on May 06, 2016 | 198 views


on the back of the cpu behind the frequency counter display. you will see the pins sticking out

Ranger Radio... | Answered on Jan 10, 2016 | 211 views


The + side of the cell is smooth on the top (no seam), and the - side has a seam going all the way around it as shown below:


25916148-r0yzlqghevn4wmvg3zw5spzn-3-0.jpg
This side ^ is (+) and this side ^ is (-)

Ranger Radio... | Answered on Oct 20, 2015 | 99 views


ship to shore communication and weather reports.

Ranger Radio... | Answered on Oct 01, 2015 | 151 views


Do like I just did,Google it and your answer will be an affirmitive YES.

Ranger Radio... | Answered on Oct 01, 2015 | 113 views


this is fixya,not the want ads,please remove this post

Ranger Radio... | Answered on Jul 27, 2015 | 67 views


take it to a tech , if you have to ask then you are not able to work on it . It is definatly an internal problem.

Ranger Radio... | Answered on Jul 17, 2015 | 110 views


I gotta get me a ranger radio with the windshield washer pump.

Ranger Radio... | Answered on Jul 17, 2015 | 101 views

Not finding what you are looking for?
Ranger TR-696F SSB CB Radio Logo

Popular Tags

10 questions posted

Ask a Question

Usually answered in minutes!

Top Ranger Radio Communications Experts

Mike Charette

Level 3 Expert

1847 Answers

normis101

Level 2 Expert

65 Answers

Robert McClure

Level 2 Expert

161 Answers

Are you a Ranger Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...