Power Acoustik PTID-4003TV Car Video Player - Answered Questions & Fixed issues


the rca jacks go to amplifiers and additional screens if you don't have those you don't need to use them .

Power Acoustik... | Answered on Mar 28, 2014 | 55 views


Ignore the above comment... SD cards and USB play fine on there (i have one).
Mine does the same, but leave it for 5-10 seconds after it says close and it loads it up!

Power Acoustik... | Answered on Sep 08, 2013 | 1,038 views


It only supports MP4 format, so that is what you need to convert the videos to. Here are the specs: http://www.shopping.com/Power-Acoustik-PTID-4003TV/info

Power Acoustik... | Answered on Apr 25, 2012 | 1,030 views


sometimes you have to format the songs and then put them on the sd card but if you allready did that your sd card might be junk and make sure the sd card you bought is for music some arent

Power Acoustik... | Answered on Mar 13, 2012 | 600 views


how much$

Power Acoustik... | Answered on Feb 24, 2012 | 285 views


Whats the problem

baadaye

Power Acoustik... | Answered on Oct 28, 2010 | 174 views


You can connect ....

Power Acoustik... | Answered on Jun 09, 2010 | 50 views


what i did is i got a 4 prong relay. its gonna have numbers on it for certain wires. the 86 is for your remote wire and the 85 is for the parking brake wire. the other 2 are just grounds.this worked on mine so it should work for yours.

Power Acoustik... | Answered on Jun 05, 2010 | 421 views


the safety trigger i assume is the safety device to prevent you watching the DVD when you are driving?

This is done by connecting the safety device wire to the hand brake connection. thus preventing the device working until you apply the handbrake

Power Acoustik... | Answered on Apr 06, 2010 | 177 views


If you bought the correct cable it should work automatically. There are no settings. However, my 5300 was flakey right out of the box and I had to send it in for repair. It works perfectly now.

Power Acoustik... | Answered on Aug 06, 2009 | 240 views


check the owners manual for the stereo and see what file system format you need to use on the flash drive i know i had the same problem when i changed radios worked on my old one but plugged into the new stereo wouldnt load had to unload the music and reformat the flash drive and then reload the music onto it that took care of the problem. where you have tried two different usb drives would say not likely you have bad drives

Power Acoustik... | Answered on May 19, 2009 | 483 views


This might be related to your question, read through the answers.

http://www.fixya.com/support/t126992-bypass_parking_brake_switch_in_order

Power Acoustik... | Answered on May 19, 2009 | 291 views


What i did was get a switch from walmart. they cost less than 2 bucks...Get one that has 3 slots..1 for power, 1 for acc, 1 for ground. Plug the brake cord the acc, and splice the power and ground cords to the other two. When your switch is off you can watch video while you drive, when its on it will cut the video off and display that message.....

If you want to do it the right way, then plug it into the emergency brake line or the parking brake line...hope i helped

Power Acoustik... | Answered on Sep 13, 2008 | 405 views


Check the wiring!

Power Acoustik... | Answered on Aug 07, 2008 | 101 views


he has to buy a mounting kit and wiring harnest for your car so it will fit in right. when he buys that there will be instructions that come with it. i hope this helps

Power Acoustik... | Answered on Nov 30, 2013 | 537 views


you can get it at best buy. ill do some lookin' cause i have a pioneer head unit and i just built that cable. i might be able to do the same for you.

Power Acoustik... | Answered on May 15, 2008 | 119 views


Yes you can...i have seen this done.

Get a switch from walmart with 3 plugs to it, 1 for power, 1 for acc, and 1 for ground. Splice the ground and battery cords and attatch them accordingly to the switch. The back cable...i think its pink or orange attach to the accessories....should be the one in the middle on the switch... WHen the switch is off then you can watch while you drive...hope i helped

Power Acoustik... | Answered on Feb 16, 2008 | 375 views


Search google for a schematic should be able to find one. I repair amps. Marks Car Audio & Amp repair
e-mail skinnman33 @gmail.com I can be reached at 727-266-6398 Let me know

Power Acoustik... | Answered on Apr 01, 2019 | 38 views


It depends on how many channels are on the Amp. If it's a 2 channel you can bridge it using the positive on one channel and use the negative on the other channel. The Amp will give the sub more power bridging the sub.

Power Acoustik... | Answered on Mar 10, 2019 | 121 views

Not finding what you are looking for?
Power Acoustik PTID-4003TV Car Video Player Logo

37 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...