20 Most Recent Power Acoustik PTID-4003TV Car Video Player - Page 5 Questions & Answers


Ohm's Law says watts / volts = amps, so 1000/12 is 83+change -- damn! I hope you have a big, phat alternator! So fuses have to be rated somewhat higher than device load, you need a 90 amp or 100 amp fuse -- what style I couldn't even begin to guess, normal automotive fuses don't go that high.

If this is a new install, make sure your power wires are heavy enough to handle the load. A fuse's job is to blow before the wiring catches fire. The longer the wire is, the thicker it must be. Electrical fire is a catastrophe so make sure your wiring is adequate -- I know it's hard to believe but the power wire is actually more important than the speaker wire!

Power Acoustik... | Answered on Jun 28, 2015


be sure the amp is located in a well ventilated area as heat build up can cause a safety override to cut power once temp. reaches a certain point. amps do generate heat though so if you dont think its cutting out due to excessive heat building up, i'd definitely get a power capacitor to help keep a steady supply of electrical energy available for instances where the bass hits really hard or for prolonged periods of time. if you have a power cap already make sure it doesnt need to be upgraded to function properly. hope this helps!

Power Acoustik... | Answered on Jun 06, 2015


MP4 is a codec that is not compatible with this DVD player. Your DVD player will play store bought DVDs just fine. Please read the specifications in the owners manual to see what codecs are compatible with your player.

Power Acoustik... | Answered on May 30, 2015


its not supposed to do that,read your manual,it only reads memory cards,,it plays dvds
25720543-ugenz4ivcqnjcowj35hl2i3l-5-0.png

25720543-ugenz4ivcqnjcowj35hl2i3l-5-2.png

25720543-ugenz4ivcqnjcowj35hl2i3l-5-5.png
Power Acoustik PD 103B

Power Acoustik... | Answered on May 30, 2015


You should still have warranty and If so I would send it in for repair. The ribbon cable could be bad if it is a flip out style.Good Luck !

Power Acoustik... | Answered on Feb 13, 2015


Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you still have a protection light your amp is faulty. Hopefully you have warranty. Double check all connections. Good Luck.A thumbs up would be greatly appreciated if this answer is helpful to you. Worth fixing.
amp-stuck-in-protect-mode-flhv0giodkaywsjitcb2uyf1-2-0.jpg

Power Acoustik... | Answered on Feb 06, 2015


Going in and out sounds like the antenna cable got loose, but the not turning on sounds like the fuse blew. Worth checking those 2 things out first and foremost.

Do you still have your owner's manual? If not:
http://www.poweracoustik.com/pa2012/manuals/PTID-6250.pdf

Power Acoustik... | Answered on Jan 27, 2015


how random is it? Make sure the radio is grounded properly. Look in the pin outs in the harness and make sure there is a ground there. Also, you may have 1, 2, 3, or 4 bad speakers. A short in any one speaker will send the radio in protect mode. Also, If your radio is seeing less than something around a 3ohm load (technically 4) it will protect itself as well.

I’m happy to help further over the phone at https://www.6ya.com/expert/chris_7f7f91eb941fb23f

Power Acoustik... | Answered on Dec 31, 2014

Not finding what you are looking for?
Power Acoustik PTID-4003TV Car Video Player Logo

37 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Power Acoustik Car Audio & Video

  • Power Acoustik Car Audio & Video

Most Popular Question

cannot see video

  • Car Audio & Video
Loading...