20 Most Recent
Jabra BT8010 Wireless Headset - Page 7 Questions & Answers
How do you pair blue tooth to Jabra VBT185z
it auto pairs .
set mobile phone to bluetooth on
finger click on blue tooth and select discover bluetooth devices
you should see mobile phone detect jabra vbt185z
then pin is 0000 if asked
http://uswww03.gnnetcom.com/jabra/verizon/vbt185z/Datasheet_VBT185z.pdf
Why can't I pair it with my LG Smartphone?
You can do this by going to menu-settings then connectivity. Once there you simply select the option to turn ?on? Bluetooth. Some phones don't require you to go to settings first. They provide a separate connectivity icon on the top level of the menu page. Either way, once you turn the Bluetooth function on leave the phone open to the connectivity page.
Now it's time to get your headset into pairing mode. Unfortunately each headset has a different way to accomplish this. You are going to have to read the instructions that came with the headset. In any event is a very simple process which usually consists of holding down a button for a specified amount of seconds until it beeps or flashes a sequence of colors that lets you know the headset is now ready to be paired.
Easy so far right?
Once in pairing mode, have your phone look for a ?hands-free device?. This is where leaving your phone open to the connectivity page comes in handy. Select the option ?look for devices? or ?hands-free?. After a couple of seconds your phone should recognize the headset. Once the phone finds the headset you will now have to select the headset from the list and put in the pin code provided with the headset. Most headsets will use 0000 or 1111 as a pin code.
The whole process should take a first timer about 5 minutes.
Tip 1: Make sure the Bluetooth device is fully charged!
Tip 2: Have the pin code ready.
Tip 3: Make sure the headset is within close proximity of the phone when pairing.
NO POWER TO PANASONIC TV MODEL # TC-P50XT50
Try the powerboard, found it here on this site by searching the model. Be careful about removing the back cover after you unplug the tv and i would suggest using different cups to collect the different screws from each section.
Take care when removing the cables and putting back the cables and you can take pictures before you remov anything to make sure things match up. Good luck!
Not finding what you are looking for?