20 Most Recent
E-Machines T5082 PC Desktop - Page 2 Questions & Answers
Will pc2-5300 memory work in
Yes it will work
Memory Type: DDR2 PC2-5300, DDR2 (non-ECC)
Maximum Memory: 2GB
Slots: 2
Each memory slot can hold DDR2 PC2-5300 with a maximum of 1GB per slot.*
*Not to exceed manufacturer supported memory.
Although the memory can be installed one module at a time, the best performance comes from using matched pairs of modules. I’m happy to assist further over the phone at
https://www.6ya.com/expert/joe_8b8c2cd6ce148309
My ******* computer wont load
Hi jeff,
What error do you get when trying to install win7?
Have you tried booting from the disc by going to the boot menu to select the dvd/cdrom to directly boot from the Disc of win7 instead of installing form within another orpeating system.
mvincentc
Pc will not finish vista
Your computer doesn't have the required specifications to install Vista, I believe it has too little RAM. 512MB is technically enough, but it's possible Vista won't install on it because of that.
I installed a 2GB (2
This problem can occur with mismatched RAM modules. Try to use the same make, type and speed as the original RAM module.
I have a emachine t5082.
Go into the BIOS, it will be in there...I don't remember where off hand, it won't be hard to find though.
Shut
down your computer and wait for it to power down. Press the power
button and look for a message that says "Press X to enter Setup." In
most eMachines, this will be either the "F1" or "F2" key.
My computer keeps restarting randomly
Heya
This
is because the computer's virtual memory might be low.In order to fix
this problem first of all you need to know how much is your RAM which
you can check by right clicking on
MY COMPUTER>>PROPERTIES..there you will be able to see the size of RAM..
After
checking then go to my computer properties again click on
ADVANCED>>SETTINGS OF PERFORMANCE>>ADVANCED
again>>CHANGE>>CLICK ON CUSTOM SIZE AND MANUALLY CHANGE THE
INITIAL SIZE TO 1.5 MULTIPLIED BY ORIGINAL SIZE OF THE RAM AND CHANGE
THE MAXIMUM SIZE TO 3 MULTIPLIED BY ORIGINAL SIZE OF THE
RAM>>>CLICK ON SET>>APPLY>>OK
Restart the computer..
Hopefully you will not face this problem again unless your virtual memory has been changed..
REPLY IF ANY QUERIES
Thanks & Regards
LonG lIvE ThE GeeKs!!!!
DO IT HAVE WIFI
I don't think so. It is a little older, and has hard LAN port.
But you can get a WIFI card for probably like $20.
Will pny pc2-5300 work with
Ships with
512MB DDR2 (1 × 512MB), 533MHz (PC4200)
Expandable to 2GB
2 DDR2 Slots (Total) | 1 DDR2 Slot (Available)
recommend
512MB PC2-4200 M-533D-512BD10
I lost my sound and I dont have the program cd anymore
Could you please clarify what you have done exactly ?
Have you formatted the machine ? or did you just cleaned up using some utilities available in the operating system ?
However in the mean time you can try going to
http://www.emachines.com/support/drivers.html this link and choose the options available to select your appropriate machine and download the drivers for audio from there. Once they are downloaded you can install them and you probably will get back your pc's sound.
If this doesn't help please do reply with a clear problem statement and i will help you get around the problem.
Best regards
NextDoorNerd
I louse BIOS. How I can restore it.
Try opening it and taking out the little coin battery from the moatherboard for about 20 sec or more..put it back in and see if this works first....if it doesnt im not sure you can ...but let me know if this helps!!!
Not finding what you are looking for?