La Crosse Technology Wireless Temperature Station 9013 - Answered Questions & Fixed issues


I have a La Crosse unit right in front of me and it is showing +18 F tonight. Saturday, we are supposedly going to sub-zero.
With regard to your problem, La Crosse instructions are very specific about the battery replacement procedure. Remove all batteries from both units, then install new batteries in the outdoor unit. Allow time for the outdoor unit to "initialize" and begin sending temperature data. Install new batteries in the indoor unit and you should see the outdoor temperature displayed.

La Crosse... | Answered on Feb 13, 2016 | 645 views


1. Disconnect the test leads from any energized circuit and then from the instrument.
2. Turn the range switch to the "OFF" position
3. Slide off the back case battery cover.
4. Remove the battery from the compartment and unsnap the battery connector.
5. Replace the battery with a 9V transistor type battery (NEDA # 1604), For maximum battery life, alkaline cells are recommended.
6. Reverse the above procedure to complete replacement.

Measuring Tools... | Answered 2 days ago | 24 views


Have you tested the rain gauge using the calibration procedures on page 21 of the manual? Specifically confirming that the bucket is emptying about every 25 drops.

https://www.acurite.com/media/manuals/01536-instructions.pdf

Measuring Tools... | Answered on Jun 06, 2019 | 30 views


no info -generic answer check with manufacturer -owners manual online search uging make and model of mystery unit

Measuring Tools... | Answered on Jun 05, 2019 | 24 views


check Google weather, or check environment Lesotho weather station. :-)

Measuring Tools... | Answered on Jun 02, 2019 | 34 views


Depends on the make of the scales. Check manufacturer.

Measuring Tools... | Answered on Jun 02, 2019 | 23 views


Remove the outside batteries, wait a minute or so and insert the batteries. It should pair.

Measuring Tools... | Answered on May 29, 2019 | 27 views


read the instruction manual

Measuring Tools... | Answered on May 25, 2019 | 23 views


It is not unusual for a sensor placed directly in the sun to produce a reading that is higher than "normal".

Measuring Tools... | Answered on May 23, 2019 | 25 views


maybe needs batteries. after replacement let them sit close together for a while

Measuring Tools... | Answered on May 08, 2019 | 60 views


Hello Anthony, I sent you a link so you can find out the manual of the tester Sperry DM-210a and another where you get an explanation of the operation
I hope you can solve your concern
Greetings Franco Dosil

Hola Anthony, te envio un link para que puedas descrgar el manual del tester Sperry DM-210a y otro donde te dan una explicacion del funcionamiento
Espero que puedas resolver tu inquietud
Saludos Franco Dosil

https://www.hunker.com/13414165/how-to-use-a-sperry-dm-210a-meter

https://greenlee-cdn.ebizcdn.com/media/52058078REV01.pdf

https://www.hunker.com/13407450/instructions-for-a-sperry-dm-210a

Measuring Tools... | Answered on May 04, 2019 | 46 views


SUGGEST YOU TRY THE MFG'S WEBSITE OR ASK Google

Measuring Tools... | Answered on Apr 19, 2019 | 43 views


I do not believe that you can buy these separately. They are factory programmed and paired together.

Measuring Tools... | Answered on Mar 30, 2019 | 95 views


Simple, remove the batteries, leave a time without, then put back in place, will return to factory settings alone

Measuring Tools... | Answered on Mar 29, 2019 | 50 views

Not finding what you are looking for?
La Crosse Technology Wireless Temperature Station 9013 Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top La Crosse Technology Measuring Tools & Sensors Experts

Cindy Wells

Level 3 Expert

5909 Answers

Brad Brown

Level 3 Expert

18060 Answers

ka4iup
ka4iup

Level 3 Expert

4062 Answers

Are you a La Crosse Technology Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...