Top 20 La Crosse Technology Wireless Temperature Station 9013 Questions & Answers

I have a La Crosse unit right in front of me and it is showing +18 F tonight. Saturday, we are supposedly going to sub-zero.
With regard to your problem, La Crosse instructions are very specific about the battery replacement procedure. Remove all batteries from both units, then install new batteries in the outdoor unit. Allow time for the outdoor unit to "initialize" and begin sending temperature data. Install new batteries in the indoor unit and you should see the outdoor temperature displayed.

La Crosse... | 645 views | 0 helpful votes

maybe needs batteries. after replacement let them sit close together for a while

Measuring Tools... | 59 views | 0 helpful votes

Have you tested the rain gauge using the calibration procedures on page 21 of the manual? Specifically confirming that the bucket is emptying about every 25 drops.

Measuring Tools... | 28 views | 0 helpful votes

no info -generic answer check with manufacturer -owners manual online search uging make and model of mystery unit

Measuring Tools... | 24 views | 0 helpful votes

Hello Anthony, I sent you a link so you can find out the manual of the tester Sperry DM-210a and another where you get an explanation of the operation
I hope you can solve your concern
Greetings Franco Dosil

Hola Anthony, te envio un link para que puedas descrgar el manual del tester Sperry DM-210a y otro donde te dan una explicacion del funcionamiento
Espero que puedas resolver tu inquietud
Saludos Franco Dosil

Measuring Tools... | 44 views | 0 helpful votes

Remove the outside batteries, wait a minute or so and insert the batteries. It should pair.

Measuring Tools... | 26 views | 0 helpful votes

I do not believe that you can buy these separately. They are factory programmed and paired together.

Measuring Tools... | 93 views | 0 helpful votes

1. Disconnect the test leads from any energized circuit and then from the instrument.
2. Turn the range switch to the "OFF" position
3. Slide off the back case battery cover.
4. Remove the battery from the compartment and unsnap the battery connector.
5. Replace the battery with a 9V transistor type battery (NEDA # 1604), For maximum battery life, alkaline cells are recommended.
6. Reverse the above procedure to complete replacement.

Measuring Tools... | 23 views | 0 helpful votes

It is not unusual for a sensor placed directly in the sun to produce a reading that is higher than "normal".

Measuring Tools... | 24 views | 0 helpful votes

Depends on the make of the scales. Check manufacturer.

Measuring Tools... | 23 views | 0 helpful votes


Measuring Tools... | 43 views | 0 helpful votes

try the makers website

Measuring Tools... | 77 views | 0 helpful votes

Simple, remove the batteries, leave a time without, then put back in place, will return to factory settings alone

Measuring Tools... | 49 views | 0 helpful votes

Not finding what you are looking for?
La Crosse Technology Wireless Temperature Station 9013 Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top La Crosse Technology Measuring Tools & Sensors Experts

Cindy Wells

Level 3 Expert

5908 Answers

Brad Brown

Level 3 Expert

18060 Answers


Level 3 Expert

4062 Answers

Are you a La Crosse Technology Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

La Crosse Technology Measuring Tools & Sensors

  • La Crosse Technology Measuring Tools & Sensors

Most Popular Question

changed batteries in both indoor display

  • Measuring Tools & Sensors