20 Most Recent Panasonic RR-US395 Digital Voice Recorder - Page 6 Questions & Answers

Check for a broken belt or failed motor supply.

The symptoms you describe on your Panasonic RQ-2102 cassette player are indicative of a problem with the playback mechanism, most likely related to the motor or the belt that drives it. Here are some steps you can take to try to fix the issue:

1. Check the belt: Open the cassette player and look for the belt that drives the playback mechanism. If the belt is loose, broken, or worn, it can cause the speed and pitch to fluctuate or the head not to spin at all. In that case, you may need to replace the belt.
2. Clean the playback head: Use a cotton swab moistened with isopropyl alcohol to clean the playback head. Dirt and debris can accumulate on the head and cause playback issues.
3. Check the motor: The motor that drives the playback mechanism may be faulty or damaged. If the motor is not spinning at the correct speed, it can cause the speed and pitch to fluctuate. In that case, you may need to replace the motor.
4. Lubricate the mechanism: The playback mechanism may need lubrication. Use a small amount of silicone lubricant on the moving parts of the mechanism to reduce friction and improve performance.

If these steps don't fix the issue, it may be necessary to take your cassette player to a repair shop for further inspection and repair.

Question edited for clarity. Page 31 of the manual. The display can be High, Dimmed or Turned Off. https://panasonic.ca/viewing/ALL/SC-VK950/OI/rqtv0146-2l/rqtv0146-2l.pdf ..

Panasonic SA-VK82DGCP Service Manual - ManualsLib

https://www.manualslib.com > ... > SA-VK82DGCP View and Download Panasonic SA-VK82DGCP service manual online. SA-VK82DGCP stereo system pdf manual download. Also for: Sa-vk82dgcs, Sa-vk82dgs ..

CD lens cleaner CDs do not work, they just damage the laser assembly.

Where there any other cables? That does not look like a standard connector for TVs. Could that be the cable to connect the surround sound sections together, sound bar to the sub woofer and so on. Most TVs and sound bars will use Scart, Jack, HDMI or Optical leads to connect to each other. Most new systems will have either HDMi, Optical or both.

You can find a manual for the Panasonic RS-790S reel to reel on the Panasonic website. Alternatively, you may be able to find the manual and other helpful information on sites like ManualsOnline.com.

try doing a restart of the cd player

Hii Visit: https://na.panasonic.com/us/support/vrf-manuals You can download from here.

This will depend on how new your TV is and which connectors are on the back of the TV. What is the Make and model of your TV? Your DVD player is fitted with the older style of connectors called 'Video In' or the 'Component' system. A lot of modern new TV's don't use this system anymore due to the poor quality of image and sound you get from them so they don't generally install those connectors anymore. Almost all new tv's use HDMI cables. Comment below with the details of your Smart TV and I'll try to help you more.

The Service Manual has copyright 2006, so around 2005/2006

There are several things that could be wrong. The unit has seperate amps and filters for each section and is high powered at 300 Watts. A fliter may have failed or the amp may have failed. This is something that requires special tools and training to troubleshoot and repair.

Connecting the audio between the cable box and the TV is easy, if you are using one of the composite or component video inputs. Just plug in the associated R/L audio jacks in a line with the video input. If you are using the HDMI input, that carries sound on the HDMI cable. You don't need to connect the audio out of the cable box to the TC-P50C2. See the connections page of the TV manual here: https://www.manualslib.com/manual/246619/Panasonic-Viera-Tc-P50c2.html?page=12#manual . Then set the TV to this input. However, the Panasonic TC-P50C2 does not have an analog audio output. You could try connecting the cable box RCA audio out to the Bose Wave system. You will need a RCA M/M to 3.5 mm adapter cable. (Alternatively a RCA M/M to 3.5 mm F converter and an AUX (3.5mm M/M cable or a 3.5mm M to RCA F/F adapter with a standard RCA audio cable will work between the cable box and the Bose ) This may not have the audio sync correctly with the video. The alternative is to use a digital to analog audio converter and one of the above RCA to 3.5 mm solutions. Get an converter that has an optical digital audio input and an optical audio cable (Toslink). (The cable isn't always sold with the converter.) (https://www.manualslib.com/manual/246619/Panasonic-Viera-Tc-P50c2.html?page=50#manual ) See some converters here: https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 . I hope this helps. Cindy Wells

Hello Zubair, to connect your phone to the SA-AK 67, you need a cable that has two RCA connectors (White and Red) to a 3.5mm stereo jack The RCA connectors, you connect them in the AUX input that is on the rear panel of the SA-AK67 and the 3.5mm stereo jack, in the headphone output of your phone You select Aux on the Panasonic, you play something on your cell phone and you're done I hope you find the information useful Greetings Franco Dosil Hola Zubair, para conectar tu tel?fono al SA-AK 67, necesitas un cable que tenga dos conectores RCA (Blanco y Rojo) a una ficha 3,5mm est?reo Los conectores RCA, los conectas en la entrada AUX que esta en el panel trasero del SA-AK67 y el conector 3,5mm est?reo, en la salida de auriculares de tu tel?fono Seleccionas Aux en el Panasonic, reproduces algo en el celular y listo Espero te sea util la informacion Saludos Franco Dosil http://www.usersmanualguide.com/panasonic/cd_stereo_system/sa-ak57 http://www.usersmanualguide.com/panasonic/cd_stereo_system/sa-ak77

Hi, please move your device to a different outlet and attempt to run it again. This ensures that your outlet is not the issue. Also, please ensure that your device is running in the correct range of temperature as recommended by the manufacture. Thank you.

F61 is a secondary power supply issue causing the mechanics to jam up or the CD mechanism has jammed causing this message.

I had the same issue and it turned out to be 4 bad 22 uF capacitors on the main board. I made a how to video here for anyone else with the same issue. https://youtu.be/INQLUGuHHFI

The SB-HWA520 was sold as part of the SC-HTB520 home theater system. I found a manual for the entire system here: http://panasonic.ae/en/manuals/SC-HTB520.pdf . The wireless sub-woofer pairs to the main unit (SU-HTB520) with a digital transmitter that docks on the main unit. As far as I can tell there is no way to connect the SB-HWA520 without the transmitter and a main unit with the compatible docking port. See pages 7 and 17 of the manual for the pictures of the digital transmitter dock and its setup. I wish that I had better news for you. Cindy Wells

I would look on fleabay or amazon.