Top 20 Onkyo TX-SR304 Receiver Questions & Answers

Hello, I am sorry for your issue. The audio inputs should not matter. It sounds like those inputs do have a problem. Please contact Onkyo at 800-2291687 option #3 so that we can troubleshoot with you and provide options. Thank you, Onkyo USA

Your (5.1) receiver supports just 6 speakers. Left, Center, Right, Left Surround, Right Surround and Subwoofer. http://redirect.onkyousa.com/redirect.cfm?type=own_manuals&file=TX-SR304_En_0124.pdf

you get better play back using an analog input like tape. the sound is true to form and better vocals and bass response.

It may be the surround mode you are in. Some modes do not use the center channel. Try changing to a pro logic mode, these will almost always use the center

Here is the pdf http://63.148.251.135/redirect_service.cfm?type=own_manuals&file=TX-SR304_En_0124.pdf . I found it on Onkyo's support page http://www.onkyousa.com/download/own_manuals.cfm?cat=Receiver

Check the impedance of your speakers. It sounds like the amp is getting overloaded and shutting down either for over current or over heating.
Most common issue is a partially blown speaker or crossover.
Sometimes it's just a rogue strand of wire, and reconnecting everything fixes it.
But measure the impedance on all the speakers anyways!

The pecking order for output video to your monitor forbids a lower quality video (composite (Yellow) being up-ticked to anything higher (your component out) (Page23).

The wii would be visible on the Monitor Out composite output (Page 24) to the TV.

Your Onkyo TX-SR304 receivers remote (RC-645S) is not capable of controlling devices by other manufacturers. It controls only Onkyo devices.
Other Onkyo remotes do have universal remote functionality and you can download Onkyo remote codes here.

I hope that helps.
________________________________________
Download Onkyo TX-SR304 users manual here.

most of the time this is an over heating problem with the unit. Make sure that it has proper ventalation around it. It could also mean that the fan is shot on the unit . You could try using a can of compressed air in it to free up some of the dust that has accumalated inside of the unit. Hope this helps

The only possibility that comes to mind is that it may be causing a short somehow when the carousel gets to that position, maybe a broken solder joint. Another possibility is that there may be a foreign object stuck inside the player such as another disc that lost it's position.

i think ur unit deposits humidity . . try to clean it up with smooth paint brush over the boards and connectors . . better yet spray some contact cleaners i think this will do . . . otherwise resolder is needed . .

Make sure you have the sub connected to the proper output on the receiver and no connections are damaged.
Then check the gain/level control for the sub. on the receiver...turn it up if it's down.
Make sure that in speaker setup, that you have the selection for a sub turned on.

onkyo .com

Do you want to turn off the whole display?

There is a 3-way Dimmer on the front panel and the remote controller. The manual doesn't say if it will turn completely OFF.

I know nothing about tivo but dvd player might need to be on bitstream to pick it up.I have to change mine when listening to music. hope this might help.

The default assignments for the digital INPUTs to Source names are:

OPT1= Video2
OPT2= CD.

If you have never changed them you should be able to select the PS3 by choosing Video2 and the 360 by choosing CD.

Or you could go into the setup routine on Page 33 of the manual and assign each digital input to a different 'function' that works better for you.

By the way, if you have the choice of coaxial vs optical cables on a given device the cheaper, longer and least sensitive-to-dirt-and-damage choice is coaxial - plain RCA cables. You can even extend them with Male-Female extender cables or split them with Y-cables for sharing one port with two devices or one device feeding two other devices (example: Cable Box-to-TV-and-Receiver). Just don't have two sources feeding one input turned on at the same time or they'll interfere with each other. Try that with optical cables.

what u can utilize on your tx-sr304 is the optical input at the back of the receiver. connect an optical cable from your PS3 into the receiver then follow these steps:
*make sure that the digital input on the front panel of your receiver matches where you placed the optical at the back of the tx-sr304 (either OPT1 or OPT2)
*all you have to do is keep pressing the digital input at the front panel until it goes to OPT1 or OPT2 (preferrably stay on DVD mode)
AFTER completing this go to your PS3 settings:
go to settings / then go to sound settings / then audio output settings / then set it to DIGITAL OUT (optical)/ then play and enjoy.....ü

The manual on Page 10 says that with these modes (DVD,CD,MD,CDR,HDD) on the Remote you can control an Onkyo DVD player and CD/MD/CDR/HDD player/recorder.

For DVD, on page 12, it says to just push the DVD button (top right) and the following buttons will functions as stated.

ON/STANDBY button
This button sets the DVD player to On or Standby.

Number buttons
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating specific
points in time.

DISC +/– button
This button selects discs on a DVD changer.

TOP MENU button
This button is used to select a DVD’s top menu.

Arrow [UP]/[DOWN]/[LEFT]/[RIGHT] & ENTER buttons
These buttons are used to navigate DVD menus and
the DVD player’s onscreen setup menus.

RETURN button
This button is used to exit the DVD player’s
onscreen setup menu and to restart menu playback.

Playback buttons
From left to right: Pause, Play, Stop, Fast Reverse,
Fast Forward, Previous, and Next.

SUBTITLE button
This button is used to select subtitles.

AUDIO button
This button selects foreign language soundtracks
and audio formats (e.g., Dolby Digital or DTS).

DISPLAY button
This button is used to display information about the
current disc, title, chapter, or track on the DVD
player’s display, including the elapsed time, remaining
time, total time, and so on.

CLR button
This button is used to cancel functions and to clear
entered numbers.

MENU button
This button is used to display a DVD’s menu.

SETUP button
This button is used to access the DVD player’s
onscreen setup menus.

RANDOM button
This button is used with the random playback function.

REPEAT button
This button is used to set the repeat playback functions.

PLAY MODE button
This button is used to select play modes on a component
with selectable play modes.