20 Most Recent
Sony DAV-HDX500 System - Page 7 Questions & Answers
Hey i have a sony dav tz715 i have a prob with the sound
It seems like you're experiencing an issue with the sound speakers on your Sony DAV-TZ715 system when using the USB function with RFD multi mode. However, the problem resolves itself when you switch to other functions like TV. There could be a few potential causes for this issue:
1. Interference: The USB function may be more susceptible to interference, which is causing the noisy sound on the SUR L and R speakers. This interference could be originating from the USB source itself or other nearby electronic devices.
2. Compatibility: There could be a compatibility issue between the USB source and the RFD multi mode on your Sony system. It's possible that the USB source's audio format or settings are not fully supported by the RFD multi mode, resulting in the noise issue.
3. Firmware or software issue: There might be a firmware or software problem with your Sony DAV-TZ715 system. It's worth checking if there are any firmware updates available for your system that could potentially resolve the issue. You can visit the Sony support website or contact their customer support for assistance with this.
To troubleshoot the problem, you can try the following steps:
1. Test with a different USB source: Connect a different USB device or try playing different audio files from the same USB source to see if the issue persists. This will help determine if the problem is specific to the USB source or if it's a more general issue.
2. Check audio settings: Explore the audio settings on both the USB source and the Sony system. Make sure the audio format and settings are compatible with the RFD multi mode. You can refer to the user manual of your Sony DAV-TZ715 system for instructions on adjusting the audio settings.
3. Isolate interference: Move the USB source away from other electronic devices and potential sources of interference, such as Wi-Fi routers, cordless phones, or microwave ovens. This might help reduce any external interference that could be affecting the sound quality.
4. Perform a factory reset: If none of the above steps resolve the issue, you can try performing a factory reset on your Sony system. This will reset all settings to their default values. Refer to the user manual for instructions on how to perform a factory reset.
If the problem still persists after attempting these troubleshooting steps, it's recommended to reach out to Sony customer support for further assistance. They will have access to specific knowledge about your Sony DAV-TZ715 model and can provide more specialized guidance in resolving the issue.
My Sony RCD-W100 is ten years old but can no longer record on today's blank CDs. Can Din Unlock allow use of today's crop of CD-R blanks?
The "Din Unlock" feature on the Sony RCD-W100 is designed to allow the recording of audio CDs from external analog sources. It is not directly related to the compatibility of the device with different types of CD-R blanks.
If your Sony RCD-W100 is not able to record on newer CD-R blanks, it could be due to a few reasons:
1. Incompatibility: The device may not be compatible with the specific type or brand of CD-R blanks you are using. Different CD-R blanks have varying quality standards, and older recording devices may have limitations in recognizing or writing to certain types of discs.
2. Firmware/Software Update: Older recording devices may not have firmware or software updates available to support newer CD-R formats. Check the Sony support website to see if any updates are available for your specific model.
3. Aging Laser: Over time, the laser in the recording device may deteriorate, making it less effective at recording on CD-R blanks. This is a common issue with aging optical drives.
To address these concerns, you can try the following steps:
1. Update Firmware/Software: Check the Sony support website for any available firmware or software updates for your model. Installing updates may improve the compatibility of the device with newer CD-R blanks.
2. Try Different CD-R Blanks: Experiment with different brands or types of CD-R blanks to see if the device recognizes and records on any of them. Higher-quality CD-R blanks may have better compatibility.
3. Clean or Service the Device: If the device has been in use for ten years, it may benefit from a thorough cleaning or servicing. Dust or debris on the laser lens can affect its performance. Consult the device's user manual or contact Sony support for guidance on cleaning or servicing the unit.
If the above steps do not resolve the issue, it may indicate that the recording device has limitations that prevent it from working with newer CD-R blanks. In such cases, you may need to consider upgrading to a newer recording device that supports the latest technologies and formats.
Sony TA-SA300WR surround amplifier red light keep blinking
Does it blink to the beat of the sound or is it flashing? If it's flashing with no audio it usually means overheating.
If it beats to the music it's usually is a warning that you are "clipping" which means you're overdriving the amplifier This can damage the speakers and overheat the amplifier.
Avoid red lights by having each stage of amplification not exceed 95%.
My Sony Dav is10 died for no reason. Can anyone help ?
Sony DAV-IS10 not working.
Pearce Hamblin
My Sony Dav is10 is just dead. It doesn't show and sign of life and when I try to power it on it just doesn't do anything. Any answers please ?
There are a few things you can try to troubleshoot your Sony DAV-IS10 and get it working again:
Check the power source: Ensure that the power outlet you're using is working properly. You can try plugging in another device to confirm this.
Check the power cable: Make sure that the power cable is securely plugged into the unit and the power outlet. If the cable is damaged, try replacing it with a new one.
Check the fuse: Some electronic devices have an internal fuse that can blow, which can cause them to stop working. Check the manual to see if your Sony DAV-IS10 has a fuse, and if so, replace it with a new one if it's blown.
Reset the unit: Some electronic devices can be reset by unplugging them from the power source and leaving them unplugged for a few minutes. Try this and then plug it back in to see if it works.
If none of these steps work, it may be a hardware issue that requires repair or replacement. You can contact Sony customer support for assistance in this case.
How to reset a sony str-av480 receiver
To reset a Sony STR-AV480 receiver, you can follow these steps:
1. Turn off the receiver.
2. Press and hold down the power button on the front panel of the receiver.
3. While holding down the power button, press the "Enter" button on the front panel of the receiver.
4. Keep holding down both buttons for a few seconds until "Clearing" appears on the front display panel of the receiver.
5. Release both buttons and wait for the receiver to turn off.
6. Turn on the receiver and it should be reset to its default settings.
Note that performing a reset will erase all custom settings and return the receiver to its factory default settings. If you have any custom settings that you want to keep, make sure to write them down before performing the reset.
I have a Sony Dav Fx888k DVD HOME THEATER System, It's a 5 disc changer. I am unable to insert the CD. It displays C 31 00.
The error code C 31 00 on Sony DVD Home Theater System usually indicates a mechanical issue with the disc changer mechanism. Here are some steps you can try to resolve the issue:
- Turn off the power to the DVD Home Theater System and unplug it from the wall outlet.
- Wait for a few minutes, then plug the system back in and turn it on.
- Press the "Eject" button on the remote or the unit to try to eject the disc tray.
- Gently try to move the disc tray by hand to see if it is stuck or obstructed.
- If the disc tray does not move, or if you hear any unusual noises, it may indicate a more serious mechanical issue that requires repair.
If none of these steps resolves the issue, it's recommended to contact Sony customer support or a qualified technician for further assistance.
Sony wireless headphones have static...why?
The static you're experiencing with your Sony wireless headphones can be caused by various factors, including interference from other electronic devices, radio frequency congestion, and distance from the transmitter. Here are some things you can try to minimize the static:
Move the transmitter closer to your headphones: The closer your headphones are to the transmitter, the stronger the signal will be and the less static you will hear.
Reduce interference: Try turning off any other electronic devices that may be causing interference, such as microwaves, wireless routers, and cordless phones. If possible, move the transmitter away from these devices.
Change channels: Some wireless headphones have multiple channels to choose from. Try changing the channel to see if that reduces the static.
Check the batteries: Make sure the batteries in your headphones are fully charged or replaced if necessary.
Reset the headphones: Sometimes resetting the headphones can help eliminate static. Refer to the user manual for instructions on how to reset your specific model.
Contact Sony customer support: If none of these solutions work, you may want to contact Sony customer support for further assistance or consider getting a replacement if your headphones are still under warranty.
I have a Sony music system mch rv6 problem is not a turn powering on and power bottom light is on please help me
There could be several reasons why your Sony music system is not turning on. Here are a few things you can try:
- Check the power source: Make sure that the power source is properly connected and that there is electricity flowing through it.
- Check the power cord: If the power source is connected, then the problem may be with the power cord. Try using a different power cord to see if it makes a difference.
- Check the fuse: If the power cord is working properly, then the problem may be with the fuse. Locate the fuse in the system and replace it if it's blown.
- Reset the system: If the above steps don't work, try resetting the system. To do this, unplug the power cord from the wall outlet, wait for a few minutes, and then plug it back in.
- Contact Sony Support: If none of these steps solve the issue, it may be a hardware problem. In this case, you may need to contact Sony Support for further assistance. They can guide you through the next steps, which may include repair or replacement of the system.
Please note that these are general troubleshooting steps, and the exact steps you need to take may vary depending on your specific system model.
Not finding what you are looking for?
