20 Most Recent
RCA TruFlat 27F520T 27" TV - Page 8 Questions & Answers
I have Mitsubishi tv year 2004 or 2005 it turn on
I also have a Mitsubishi T.V. I had a similar problem.I was told to get cans of air and disconnect tv,and then clean dust and dirt from the inside of tv,the tv works fine now,this may help with your tv.
How to unlock your front panel of tv
Most RCA sets use a
four digit code to control the v-chip. The code reset is different depending on
the model. Try each number until you find the one that works for you.
1.
Hold down the
MENU button on the remote and VOLUME DOWN button on the TV it's self at the
same time for at least 4 seconds. The set won't say so, but the lock will be
unlocked
2.
Hold down the 0
(zero) button on the remote and the VOLUME DOWN button on the TV itself at the
same time for at least 4 seconds. The set won't say so, but the lock will be
unlocked
3.
Hold down the
MENU button on the front of the TV and the TV button on the remote at the same
time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU
button on the front of the TV at the same time for at least 4 seconds.
- Hold down EJECT button on the front of the TV set
and the MENU button on the remote at the same time for at least 4 seconds.
Depending on the model, one of the methods should unlock the V-chip. Now,
if desired, you can change the settings on the V-chip by going to the MENU
and going to PARENTAL CONTROLS, or on some sets, going to MENU and then
going to TV SETUP, then to V-CHIP SET.
My rca truflat 27f520t27'' tv keeps turning off and all
There is some shorted component/s on the main power supply regulator baord to your TV. Work with main power board circuit is fatal to any inexperienced person, as 80% of the components at this stage will be Hot [electrically], when the set is switched ON. Without switch it ON, you cant check the voltages at this section. S, if you are not experienced to do this work, contact any experienced service technician to get this set repaired.
Its on standby
II2 data bus is shorted. The set need a through checkup. It isn't a fault with power supply regulator section. Main board should be troubleshooted.
Tv will not show a picture
It sounds that LOT {Line Output Transformer} to your TV is faulty. It is leaking out high-tension voltages to surrounding components. If so, there will be crackling sound will be heard inside the TV. Caution: Never switch ON this set, till the fault has been rectified, other wise, more components will get damaged. Contact any experienced service technician to get it repaired.
I need the tv code for a RCA tv
Codes for RCA are: 0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342
0003 0015 0022 0096 0113 0125 0179 0187 0188
Rca 32" 32v432t
What is the problem with your RCA TV? Provide some more details, please.
RCA TruFlat 27F520T 27
Just check this TV by connecting it to on-air programs. Connect external antenna to it, and make an auto tune function. Refer to its user manual for details. If TV do not tune in to on-air channels too, the tuner to your Tv should be checked and replaced. If it receives on-air channels, and only cable channels are missing, you must contact the service provider to your cable connection.
I have no color what can I do to get it back.
Just make a factory reset to your TV. Refer to its user manual for details. If you haven't its user manual, send your email address to me, and get back a copy of it by return mail.
How to remove the fpa lock
Visit this site 'Electro-help' by type in this site name to google search box. It have all details. I've been with it since last month to get some details. Your TVs problem is described in detail. It seems to be a read only site, as I'm not able to copy and paste the revalent meterial from it to you. Visit it. the site seem to be purely technical.
Turn off dolby digital
Enter into its Menu option, surf though, come to sound adjustment window and turn OFF [Dolby Digital function OFF.
Not finding what you are looking for?