Xact Communication X32X-2 2-Way Radio - Answered Questions & Fixed issues

Check to make sure the batteries are installed correctly. Many times they have an insulator placed between the contacts to keep them from running down.

The only thing you can do is contact the company that makes this product. It might be cheaper to purchase a new pair of radios complete with chargers.

I can't seem to find the manual online, but you could pose the question at Customer Support... http://www.xactllc.com/customer-support/

http://tekgems.com/Products/et-9686-con-x3x-n.htm

Not worth the purchase price of batteries. Can buy similar radios for cost of new batteries

i have 2way marlboro watch walkie talkie. I can figure out these thiings. it didnt come with a manual missy

BatteryDepot.com has them for $16.95:

http://www.batterydepot.com/battery/TW-1725?gclid=CIzd0r-ZlaACFRy4sgodc3soeA

You might be able to find them at a lower price if you Google.

Bill B

battery is drained or dead...take it out and make a way to connect it with correct polarity to a DC source with a voltage 20-30% higher...

Batteries have a life from 1-5 years, the manufactuers stated life depends on how much they were or were not used. Check battery price vs different new radio price, some radio's batteries cost more than a new radio with batteries.

Do a search on eBAY. There are lots of second source batteries there and they seem to be decent quality. I have bought many for all sorts of devices from these venders.

your device should be marked with polarity and voltage requirements. Any power supply with the correct plug meeting those specs (if amperage isn't marked, look for one that is between 500- 1000 mA) should be fine. MAKE SURE it is a DC supply if the device you are using is marked DC.

I recommend RadioReference.com, they have detailed lists from all over the United States. In addition to frequency lists, they also include live audio, HAM radio lists, licensing information and a lot more.

I have the same problem. When o remove the interface the led is not flashing as per the instruction manual

Home - SONOFF OfficialSONOFF Official https://sonoff.tech Explore the innovative world of SONOFF, learn and chose about various smart home products, define your smart home,your smart choice!‎SONOFF Products · ‎Basicr2 · ‎ZigBee Bridge · ‎Home AUTOMATIONA Thorough Pairing Guide To SONOFF Smart Devices And ...SONOFF Official https://sonoff.tech > product-review > tutorial > how-to-p... How to quickly pair sonoff smart devices with ewelink app? This guide covers a complete and instuitive pairing instruction for all sonoff devices.Contact maker support. It is likely an issue with the new broadband router. The will know if there are compatibility issues..

All questions need FULL 'make model (what it is) first 3 words please. Something to do with this? The serial number should on the label on the rear by the mains cable. This is a statutory requirement unless someone removed it to hide its identity. https://www.google.com/search?q=KPG-790 ..

There are some ideas here, but also make sure Squelch isn't all the way up, that you aren't on some type of mute and that the Volume isn't at Zero. https://www.google.com/search?q=two-way+radio+transmits+but+does+not+receive https://www.google.com/search?q=KEM+P29923 ..

This question edited for clarity. Contents of correction Question added here and Deleted. Did you read the Manual? It looks like it has Volume Buttons on the side and may be set to Zero volume? https://www.motorolasolutions.com/en_us/support.html https://www.motorolasolutions.com/en_us/products/two-way-radios/analog-business-radios/portable-radios/bpr40.html#tabproductinfo ..

Usually black wires are used for chassis ground.