Top 20 Motorola Mobility H350 Wireless Headset Questions & Answers

i dont know

Have you tried deleting and recreating the pairing?

0000 Mark Motorola Support

go here for your manual

Just press the Turn on button for a while, it will be turned off.Android 4.0 Tablet PC

Hi!

If you have paired and connected the headset to your computer, then please do the following:

1. Sign in to Skype and in the TOOLS menu, select OPTIONS...
2. Under AUDIO SETTINGS, select your Bluetooth headset from the MICROPHONE, SPEAKERS and RINGING drop-down list.


Please let me know if it helped.

Best regards

Hi,

The passkey or PIN is 0000 (four zeros)

For more details, download and refer to the manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader.

Thanks for using FixYa.

To turn the headset on (when not plugged into power) hold down the big silver button and either the volume up or down key at the same time for at least a couple of seconds.

You will need to pair it up after that. To pair it, you need to hold down one of the volume buttons. In discovery mode, the light will not flash, but will be on. Discover the device and use the passcode 0000. Once done, the light will flash 5 times.

To turn it off, just repeat the turn on procedure

Hope this helps

In order to pair it with your phone, press and hold the call button for some 6 to 10 seconds, until the indicator light is steadily lit (it will flash, as if you were turning it on, but don't release the button, then). It is in pairing mode now. Then, within the next couple of minutes, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000'. If the pairing process is successful, your headset should enter the stand-by mode. There could be an indication of a connected device on your phone too.
Hope it works for you.
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Anyway, please let me know if you need further informations.

Regards, Carlos

It is hardcoded to '0000'. Nevertheless, you must put in pairing mode prior to pairing it with your phone. In order to do it, press and hold the call button for some 6 to 10 seconds, until the indicator light is steadily lit (it will flash, as if you were turning it on, but don't release the button, then). Then, within the next couple of minutes, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000'. If the pairing process is successful, your headset should enter the stand-by mode. There could be an indication of a connected device on your phone too.

Hope it works for you.
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Anyway, please let me know if you need further informations.

Regards, Carlos

It is hardcoded to '0000'. Nevertheless, you must put in pairing mode prior to pairing it with your phone. In order to do it, press and hold the call button for some 6 to 10 seconds, until the indicator light is steadily lit (it will flash, as if you were turning it on, but don't release the button, then). Then, within the next couple of minutes, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000'. If the pairing process is successful, your headset should enter the stand-by mode. There could be an indication of a connected device on your phone too.

Hope it works for you. ]
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Anyway, please let me know if you need further informations.

Regards, Carlos

Hi,

The passkey is 0000 (four zeros)

For more details, download and refer to the manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader.

Thanks for using FixYa.

Hi, If your headset is in paring mode, it will show up on the phone either with the name of device or something like this [unknown headset] or [b2.c3.f4.56.a1] (called a MAC address).

Either way, select it, and hit OK.


The phone will now ask you for a "Pin" or "Passcode", which is a 4 digit number. Headsets will ALWAYS have 0000 (four zeros) as a pin or passcode. I have never encountered a headset with a different number as a passcode. I have been in wireless for 10 years, and still have not found a headset that has any different numbers.

Enter these four zeros and select "OK"


The headset and phone will connect to each other. The phone will display a message that will be something to the effect of:
"Connected to headset".

At this point, the phone MAY ask if you want to use the headset. This means all audio from phone calls would be routed to the headset rather than in to the phone's speaker or earpiece. Select yes, or ok.


Your headset is now set up for you to talk on like a REALLY important CIA agent or something of the like...

Keep in mind that when a call comes in, the phone will still ring like normal.

You can answer the call by either:

1. Pulling the phone out of your pocket and hitting the answer button.
2. Touching the answer/end button on your headset without reaching for you phone.

The range of your headset is up to 30 feet, in a direct line of sight.

If you go into another room, your range may be decreased.

If you do happen to go out of range, the call will be transferred back to the phone, and as soon as you are in range again, touch the answer button on the headset to let the phone know you're back in range. It will re-transfer the call back to the headset.


If you turn off the phone, or headset, you can repair them again simply by going to the bluetooth menu and selecting the headset again from the list. It will reconnect without a pass code and you are up and running again.

*** Please note that you do not have to hold down the answer/end button on the headset until it goes a solid on again.

Tips & Warnings

If you have difficulty, please feel free to contact me and I'll help you get things sorted out.

motorola uses two pin pairing codes for their blue tooth devices they are as follows,0000,or 1234 there are two other codes for blue tooth devices as well they are as follows 1111,or 9999 glad to be of assistance.

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Kindly let me know if you have any difficulty in downloading the manual.

Thanks for using FixYa.

The passcode for the H350 is 0000 (four zeroes)

Yes.

The code for the Motorola H350 is 0000

Generally with these headsets you will need to gently pry open the exterior casing as they are glued together. When you have access to the inside of the headset you can try to realign / replace the spring underneath the button.