20 Most Recent Motorola Mobility H350 Wireless Headset - Page 8 Questions & Answers

Here is the link to the quick steps guide.

http://www.motorola.com/staticfiles/Support/Mobile%20Phones%20Accessories/H350/US-EN/_Documents/Static%20Files/H350_QSG.pdf

the default code for this and most is 0000 i have the same one and had the same problem but this works and was stated in the manual i lost lol

If you ever store it in your pocket you may have lint blocking the microphone hole. Look for a tiny circular hole or slot near the pointed end and inspect it for lint. Use a sewing needle to carefully pull any lint out. Don't go to deep or you could damage the mic.

the default passcode is 0000. I hope that helps.

Hi
Try going into paired devices or active devices and delete from there

The problem was human error ! All solved thank you

need new passkey for got mine

Turn it on until the blue light stays on... your phone should search for it.

Try 0000 (zero)

ARE U FOLLOWING THE CORRECT PAIRING PROCEDURE
pls follow this

ok here u go first turn on the bluetooth func in ur mobile, now while ur bluetooth headset is off press the power centre big button for like 10 sec until the blue light stays on continously not blinking position ok then search for bluetooth devices in the phone bluetooth config ur headset will come up like JABRA VBT2050 select it then it will ask u for pairing code input 0000 and press ok ur device is now connected u will see the blue light which was continous b4 now blinking it means ur haedset is connected , u have to complete this process in almost 1 min bcoz there is a timeout for this process , now try any call u will hear it in ur headset

pls rate me fixya for this if it helped

Hi,

The pairing code should be 4 zeros: 0000

Pin or pass code should be 0000.

Try 0000 when prompted for the PassCode..

Follow the link. It will take you to the Motorola support center. It explains what to do.

http://www.motorola.com/consumer/v/index.jsp?vgnextoid=1cdd4e3cfc35a010VgnVCM1000008206b00aRCRD&ps=y&pg=PG_TYP_00003&show=globalSupport&productID=c1df9f85dc575110VgnVCM1000008206b00aRCRD

Try 0000

Pin code for the majority of Bluetooth is 0000.

Not being cheeky buddy but I have the same pairing are you tapping in "0000". Also go into settings and headphone or carsettings and set to auto answer. Hope this helps M8

1. SWITCH ON THE POWERBUTTON BTHS AND PRESS THE PUSHBUTTON FOR A FEW SECONDS UNTIL THE LIGHT STOPS BLINKING.
NOW YOU CAN SEARCH FOR THE BTHS. AFTER SEARCHING PAIR IT ,PASSSWORD IS 0000.

ok here u go first turn on the bluetooth func in ur mobile, now while ur bluetooth haedset is off press the power centre big button for like 10 sec until the blue light stays on continously not blinking position ok then search for bluetooth devices in the phone bluetooth config ur headset will some up like motorola h550 select it then it will ask u for pairing code input 0000 and press ok ur device is now connected u will see the blue light which was continous b4 now blinking it means ur haedset is connected , u have to complete this process in almost 1 min bcoz there is a timeout for this process , now try any call u will hear it in ur headset

pls rate me FIXYA for this