20 Most Recent Motorola Mobility H350 Wireless Headset - Page 3 Questions & Answers

I unlock mobile from the site http://www.unlocking4free.com/unlock-your-phone
It gives the high solutions at free of cost.
It unlocks only the rare models.
If you wish you can go through this site.

I've successfully paired this headset with Vista but only for Skype. In Control Panel set the Bluetooth discovery and it should pair OK but then you need to run Skype which will find the headset and ask if you want to use it. The solution is a bit temperamental because the microphone volume is usually either low or there is too much background noise.

Hi,

You can download the manual by clicking this link

You'll require Adobe PDF Reader installed on your PC to view this manual. If it is not already installed on your PC, download it free from:

http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa

Password is fixed as 0000. Most headsets are 0000 or 1234.

Generally with these headsets you will need to gently pry open the exterior casing as they are glued together. When you have access to the inside of the headset you can try to realign / replace the spring underneath the button.

Yes.

by pressig the volume button up and down

on the handset press the volume buttons

any thing else idont know

motorola uses two pin pairing codes for their blue tooth devices they are as follows,0000,or 1234 there are two other codes for blue tooth devices as well they are as follows 1111,or 9999 glad to be of assistance.

Hi,

The passkey is 0000 (four zeros)

For more details, download and refer to the manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader.

Thanks for using FixYa.

Hi, If your headset is in paring mode, it will show up on the phone either with the name of device or something like this [unknown headset] or [b2.c3.f4.56.a1] (called a MAC address).

Either way, select it, and hit OK.


The phone will now ask you for a "Pin" or "Passcode", which is a 4 digit number. Headsets will ALWAYS have 0000 (four zeros) as a pin or passcode. I have never encountered a headset with a different number as a passcode. I have been in wireless for 10 years, and still have not found a headset that has any different numbers.

Enter these four zeros and select "OK"


The headset and phone will connect to each other. The phone will display a message that will be something to the effect of:
"Connected to headset".

At this point, the phone MAY ask if you want to use the headset. This means all audio from phone calls would be routed to the headset rather than in to the phone's speaker or earpiece. Select yes, or ok.


Your headset is now set up for you to talk on like a REALLY important CIA agent or something of the like...

Keep in mind that when a call comes in, the phone will still ring like normal.

You can answer the call by either:

1. Pulling the phone out of your pocket and hitting the answer button.
2. Touching the answer/end button on your headset without reaching for you phone.

The range of your headset is up to 30 feet, in a direct line of sight.

If you go into another room, your range may be decreased.

If you do happen to go out of range, the call will be transferred back to the phone, and as soon as you are in range again, touch the answer button on the headset to let the phone know you're back in range. It will re-transfer the call back to the headset.


If you turn off the phone, or headset, you can repair them again simply by going to the bluetooth menu and selecting the headset again from the list. It will reconnect without a pass code and you are up and running again.

*** Please note that you do not have to hold down the answer/end button on the headset until it goes a solid on again.

Tips & Warnings

If you have difficulty, please feel free to contact me and I'll help you get things sorted out.

The passcode for the H350 is 0000 (four zeroes)

The code for the Motorola H350 is 0000

I dont have one.

Hi, Just get it unlocked at : www.unlock-zone.com

Hello,

the default code is 0000.

if that doesn't work try

"0"

or

"1111"

or

"1234"

One of the above should work.

Good luck.

yes, it can be. first turn off the first device

Usually the default pass key for pairing bluetooth devices is 0000. Try this and see if it helps. What number is listed after SYN? If you could let me know by replying here I will try my best to help you out.

Thank you for using FixYa

Greetings-

Motorola handsets and accessories will use the following default passkeys: 0000 or 1234.
I hope this helps

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Kindly let me know if you have any difficulty in downloading the manual.

Thanks for using FixYa.