D-Link Xtreme N DIR-655 Wireless Router - Answered Questions & Fixed issues

Reset your wireless password/key. Login in using your browser and go to the wireless settings and set-up a wireless password/key. Remember the key because each device will now need it to connect. You can also turn OFF Broadcast SSID and your network name will not be shown on anyone's device. You must remember the network name when using this method.

What kind of construction surrounds your router? Weak signal indicates walls reducing signal strength. Try a repeater in weak areas.

I would look to see if there are any nearby wireless networks residing on the same or adjacent channel. If so, change the channel the router is broadcasting the network on as this can easily cause the types of issues you are describing.

Make sure the power setting does not allow the ethernet card to be shut off. Also look through the other settings on the ethernet card properties menu. Some of those affect the stability of the connection. You access the setting through device manager.

Make sure you use the correct cable between the router and the D-Link. If you use the blue wire it won't work. The orange and orange white pair have to be swapped with the green- green/white pair on one end of the cable only. Usually, the cable is orange in color and is called a crossover cable.

Login in using your browser and go to the wireless settings and set-up a wireless password/key. Remember the key because each device will now need it to connect. You can also turn OFF Broadcast SSID and your network name will not be shown on anyone's device. You must remember the network name when using this method. You do not need the disc. Using you browser, login into the router using the default IP 192.168.0.1 unless this has been changed and you should be able to configure your router.

The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can ssets-up form scratch.

Login into you router using your browser (connected by a LAN cable) and under the wireless section you should see the network password. The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can ssets-up form scratch.

No this is not available on this unit.

Try rebooting the router. Does your laptop "drop out" when connected to other networks? The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can ssets-up form scratch.

First try replacing your LAN cable between you internet modem and the router. A bad cable the is intermittent may cause this issue. Try rebooting the modem. Also if possible try a direct connection to your internet modem by LAN cable or wireless and see if your connection stays up. You could have a bad internet modem or other connection issue from your provider The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset. If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can ssets-up form scratch.

I would suggest a factory reset of the router. Then you can set-up the router with you own passwords, SSIDs.

Connect to you router using you browser and go to wireless settings. There you can set a wireless password. You can also set a password to login to your router itself

Does folder sharing work through WiFi?
Might be that the IP ranges are not in the same subclass network if the IP numbers are not coming from the same DHCP server.
Did you check the IP number on Computer B in case of the cabled connection and when it is connected on the WiFi? They should only differ in the last digits, not the first 3 groups.

Internet search using Google or Yahoo will give you more information on your router than you could ever decipher!

Using VPN proxy http://www.bestcheapvpnservice.com/cheap-vpn-proxy/ will enable you to unblock websites and bypass blocking easly with simple software just pressing connect to open blocking and disconnect to block sites again

For setting up your resetting d-link router password you have to follow these steps.. 1. open your browser and type 192.168.1.0 and type user name and password 2.go to wireless settings and setup ssid ( network name ) and password 3. than click save and apply for more technical help you may can contact d-link Tech Support i hope this will help you thanks

Not enough information. But if I had to guess, make certain that you have the older wirless network turn on at the router. You father laptop my not support the N network. A router usually call this cts protection mode.

ftp://ftp.dlink.com/Gateway/dir655/Apps/RouterSetup_dir655_410.exe

use an online unlock code solution provider