Top 20 Olympus VN-2100PC Digital Voice Recorder - Page 2 Questions & Answers

The VN 2100PC has a USB port & cable. Once connected, a USB profile should show up in Finder, you should be able to find your recordings and copy them.

An easier way to copy data from the VN-2100PC to the Mac would be to load them on a PC and copy them over with a usb drive onto your Mac.

You could also plug it into the line-in jack on the Mac and record into GarageBand. Use a standard 3.5" TRS Male to 3.5" TRS Male cable. If you don't have a line-in port on your Mac, you can use the iMic here: http://www.griffintechnology.com/products/imic

Olympus has a new digital voice recorder, the LS-10, that's Mac compatible. Check it out here: http://www.olympusamerica.com/cpg_section/product.asp?product=1350&page=overview I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Hi p_cullingfor,

i am afraid that is not possible. the best solution is to hold the voice recorder near the microphone of the phone and record.

i hope this helps, good luck!

Try www.olympusamerica.com for manuals and downloads,...you can contact them at 1-888-553-4448.

Do you have correct software for your PC O/S.??
I f you need soft ware go to www.olympusamerica.com

You may download the Win7 driver here.

The "ERR" message means a memory error. solution, is to reformat the memory. Try to press the STOP and DISP/MENU buttons at the same time for about 2 seconds, and then the display should show "FOR". It will erase the whole memory making the device usable again.

Regards

Contact Olympus at 1-888-553-4448.

Contact Olympus at 1-888-553-4448.

Download users manual at www.olympusamerica.com

The VN-2100PC is not compatible with 64 bit O/S neither xp or vista or 7....sorry.
Available software downloads can be got at www.olympusamerica.com

Are you trying to record while it is "locked"? I believe you can lock the whole device so you can't accidentally press a button. Are you familiar with this? Let me know if you need help figuring out if it's locked or not, I am trying to research this now.

Tim

Software downloads are available at www.olympusamerica.com or contact them at 1-888-553-4448.

Once you have deleted files they are gone...there is no "RECYCLE BIN"...feel free to verify by checking at www.olympusamerica.com

Yes you got a new computer but unfortunately the vn-2100PC is not compatible with 64 bit OS's neither XP 64bit or Vista 64 bit...therefore it will also not work with 7 64bit.
Feel free to verify by checking at www.olympusamerica.com

Software downloads are available at www.olympusamerica.com

You don't say if you are running a 32 or 64 bit o/s. ??
The VN-2100PC can run Vista 32 bit ..but does not work with Vista 64 bit systems.
So....you can download software for Vista 32 bit at www.olympusamerica.com this should work with Win7 as long as it is a 32 bit system.

Downloads are available at www.olympusamerica.com or you can contact them at 1-888-553-4448.

Check to make sure the O/S of your pc is compatible with recorder.
If you have lost your users manual go to www.olympusamerica.com to download one.

Downloads are available at www.olympusamerica.com .

Foe downloads go to www.olympusamerica.com .