20 Most Recent
Mitsubishi WD-65731 65" HDTV - Page 7 Questions & Answers
I need to change the
The blinking lamp light refers to the lamp door not being closed. There is a little lever behind the main panel and if that's not shut, the lever won't be pressed in and therefore the light blinks. If it's a failed lamp, the lamp indicator light will be a solid, not blinking.
I need to change the
I have the same exact tv mitsubishi offers a one year warranty from the date of purchase the website is mitsubishi.com and if you don't have anymore warranty you have to pay $250.00 for the bulb. I didn't have the warranty anymore so I went to a website bluestar-online.com and I paid $129.00 for a WD65731 bulb and free shipping 2-3 days. Hope this helps.
[email protected]
Air flow blocked...turning off in a few seconds message
"air flow blocked" means its getting too hot. or it thinks it is. it is quit common on these set that the thermal sensor has malfunction replaceing this sensor is your solution. since this is service bulliteen item at service centers of mitsubidshi products this may be an item covered under warrenty. so i would first check with you local service shop too see before
Audio, no picture wd-65731
lamp light green is a normal code. Try turning set on 3 times and see if lamp light goes red. If it does you have a bad lamp. Also check to see if lamp is on all the time. This a problem that can happen and service tech needs to fix it. Let me know what happens.
Volume turns on and no picture
Hello:
Depending upon your model, Mitsubishi did have a factory recall on some of their DLP TVs with a lamp cooling related issue (a faulty thermal sensor). This repair is covered by Mitsubishi if your model is one of those with the known issue.
Please feel free to contact us at
www.DLPLampSource.com or by telephone at 866-764-5822 and we would be happy to assist with more information.
Regards
Dan
www.dlplampsource.com
Dark spot
some of thease have round doors on the sides tward the top, there held on by 1 screw, take that off( if you do it while the tv is on, you will see it better, you can reach in there with a soft cloth, or swiffer sweeper, if it doesnt have those doors, then you will need to take the screws out around the screen , from the back, then you can lean the screen forward about 6 inches, reach in there with a duster and wipe the dust off
I have a Mitsubishi WD-65731,
You need to have the servicer check and re-seat all the connections to the light engine. It is also possible that the new engine may be at fault.
Color/Pic problems Mits WD-65731
it sounds as though there is a problem on the main board and yes,it will be expensive to repair.i would guess between 400 to 600 possibly more depending on how much damage is on the main board. i know this isnt what you want to hear but i have a friend that has a tv repair shop and i know he gets big money for repairs on big screens.
Red Status Light
Hi we have a 52 inch mitsubishi high definition tv and ours did the same thing,we had a repair man out here and he said it was the engine in the tv which we never knew tv's had engines so i contacted mitsubishi cause we didn't take a entended warranty and told them that it was not even 3 yrs old and they should stand up to there products and they did they paid for the part which was 600 dollars and we had to pay for labor....we thought it was the light to and ordered one and it wasn't it was doing the same thing yours did .....
My tv blinks 6x red and 1x yellow. whats that mean?
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
https://homenol.blogspot.com/
https://electronicshelponline.blogspot.com/
If blinks continue without any pause, or the LED light stationery; the main board is faulty.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview/
Not finding what you are looking for?
