Radio Shack Pro-97 Handheld Scanner - Answered Questions & Fixed issues
Problem with Pro-2066 scanner not receiving local
It is difficult to explain in simple terms but I will try.
Google rebanding.
Some radios can have their firmware updated but I don't think your PRO 2066 can.
Channel numbers and frequencies preprogrammed into your scanner have changed over the past few years.
When a data signal says go to channel X that channel is now Y, but your scanner is still looking for X
Hope this helps
8/26/2017 3:57:19 AM •
Radio Shack...
•
Answered
on Aug 26, 2017
•
1,133 views
Police frequencies michigan
Hi, must have a digital trunking scanner first and foremost if you want to monitor the state radio frequencies. You much has a ham radio license or 'permit' to use the scanner or even have the scanner in you car. You can sign-up for a premium membership at Radio Reference dot com and it will set you up with direct loads of frequencies and talkgroups. Here's a link to help you:
https://www.radioreference.com/apps/db/?stid=26
5/1/2017 6:24:45 PM •
Radio Shack...
•
Answered
on May 01, 2017
•
107 views
I turn on my pro -97 Handheld Scanner and it displays all channels are locked
Turn the scanner on and make sure that you don't see a "key" in the display- if you do, you first have to press and hold the key LOCK button until it beeps and allows you to use the keys. press 'manual'. press and hold 'L/O' 'lockout' for 3 seconds and it will unlock all locked out channels. now press 'scan'. if you have nothing, then press 'scan' again and press each one of the number keys to turn off and to switch on the scanning banks. Okay? Let me know if you need more help.
5/1/2017 6:19:55 PM •
Radio Shack...
•
Answered
on May 01, 2017
•
268 views
WHERE IS THE BUTTON i PUSH TO UNLOCK ALL CHANNELS
turn the scanner on. press 'manual'. press and hold 'L/O' 'lockout' for 3 seconds and it will unlock all locked out channels. now press 'scan'. if you have nothing, then press 'scan' again and press each one of the number keys to turn off and to switch on the scanning banks. Okay? Let me know if you need more help.
5/1/2017 6:17:55 PM •
Radio Shack...
•
Answered
on May 01, 2017
•
264 views
All channels locked out
Press scan, then press a number button and it will scan that bank -pick a number from 0-9 and it should scan that. If you did truly lockout everything hit 'manual' then hold down the L/O Lockout button for 3 seconds and you'll hear a beep- that should unlock everything.
5/1/2017 6:11:27 PM •
Radio Shack...
•
Answered
on May 01, 2017
•
101 views
Radio Shack 16a Handheld Scanner
I had the same problem and when this happens I just press and hold the scan button until it beeps and begins to scan again.
1/6/2014 8:50:53 AM •
Radio Shack...
•
Answered
on Jan 06, 2014
•
100 views
Cant pick up stations
Most police stations are using the new motorola trunking units, they are on encrypted custom band channels and you will not be able to hear them. All police helicopters are equipped with them. All i can hear where i live is Fire dispatch, I cant even hear the fire fighters responses .
11/29/2013 10:13:09 AM •
Radio Shack...
•
Answered
on Nov 29, 2013
•
271 views
POLICE SCANNER FREQEUNCIES
finding the frequencies is pretty straight forward...
here's one easy solution..The simplest way is to GOOGLE.
go to google.com
enter "radio frequencies" and your county name and state..
you'll get the links to posted municipal services' radio freq's.
Then simply enter them into your scanner memory...
If you need the "10 codel" definitions, you can get those too so that you'll fully understand what all their abbreviations mean...
Have fun..
10/16/2013 7:51:45 PM •
Radio Shack...
•
Answered
on Oct 16, 2013
•
326 views
PRO-2066 MANUAL
You can download your scanner manual here:
http://support.radioshack.com/support_electronics/49679.htm
For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com
Bill B
4/17/2013 4:11:19 PM •
Radio Shack...
•
Answered
on Apr 17, 2013
•
1,276 views
Scan says all channels locked out
Please try this,If the scanner's display locks up or does not work properly after you connect a power source, you might need to reset or initialize it. If you have problems with the scanner, first try to reset it to retain the memory. Warning: Initializing the scanner will clear all channel memories and reverts it the state it was in right out of the box.To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. 'Please select factory tests. Exit if no key is pressed' will briefly appear. Then quickly press 1. 'Initialization clear all memory Enter to confirm Clear to exit' will briefly appear. Quickly press ENT to initialize. 'Initializing, Please stand by' then appears. Do not turn off the scanner while it is initializing. The display should then show M000 on the top line and Bank 0 CH 00 when finished.Hope that helps!!Happy Scanning
4/4/2013 7:08:45 AM •
Radio Shack...
•
Answered
on Apr 04, 2013
•
250 views
Reset scanner
Please try this: If the scanner's display locks up or does not work properly after you connect a power source, you might need to reset or initialize it. If you have problems with the scanner, first try to reset it to retain the memory. Warning: Initializing the scanner will clear all channel memories and reverts it the state it was in right out of the box.To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. 'Please select factory tests. Exit if no key is pressed' will briefly appear. Then quickly press 1. 'Initialization clear all memory Enter to confirm Clear to exit' will briefly appear. Quickly press ENT to initialize. 'Initializing, Please stand by' then appears. Do not turn off the scanner while it is initializing. The display should then show M000 on the top line and Bank 0 CH 00 when finished.Hope that helps.Happy Scanning!!
4/4/2013 6:56:34 AM •
Radio Shack...
•
Answered
on Apr 04, 2013
•
270 views
Not finding what you are looking for?