20 Most Recent Dremel Variable - Speed Multipro Rotary Tool 395 - Page 7 Questions & Answers


sounds like the rubber connector between the motor and collet.i use rubber tubing and hot glue to keep it working. bad news is you have to disassemble it to install a new connector.

Dremel Variable... | Answered on Jul 13, 2009


get a hot glue gun and go to your local hardware store and buy a piece of tubing to fit the collet shaft fill with hot glue and press it on the shaft.

Dremel Variable... | Answered on Jul 07, 2009


it is the coupling inside of it called a flex coupling and it seem s like it is made of wax or something. tomorrow i will go to home depot to see if they carry metal ones that won't break.

Dremel Variable... | Answered on May 29, 2009


Return it for replacement. If your power source is good and you have pressed the ON switch/button and nothing works, it is likely faulty. If you are not familiar with pulling them apart, it is best not to! Seek a replacement (hopefully under warranty)

Dremel Variable... | Answered on May 24, 2009


You can either go to Dremel.com and type in your model number for replacement parts or call their toll free number at 1-800-437-3635 and get that information. Let me know if you need anything further

Dremel Variable... | Answered on Mar 28, 2009


Do not use the threaded bit. You need a mandrel that has a tiny screw on the top. Take the screw out and thread it onto the cutting wheel and then screw it back on. My book says its mandrel #401.

Dremel Variable... | Answered on Mar 23, 2009


this homelite saw requires homelite chain oil as there is no adjustment.

Dremel Variable... | Answered on Feb 26, 2009


I would go to Dremel.com or call their help line at 1-800-437-3635 and speak with one of their specialists.

Dremel Variable... | Answered on Feb 25, 2009


Someone else recently asked the same question and got the following solution;

http://www.fixya.com/support/t1515699-variable_speed_switch_dremel_395_get


Dremel Variable... | Answered on Jan 29, 2009


The part number you need is 2610945681 variable speed switch. I checked a couple site with no luck but I suggest you call Dremel at 1-800-437-3635 and order direct. Good luck

Dremel Variable... | Answered on Jan 10, 2009


I would call Dremel direct at 1-800-437-3635 and order them. They also have a tech line, but I would think that they are in a bind when installing and cracking. Look at the bearings to make sure they are not tight or completely locked up. Let me know if I can help further

Dremel Variable... | Answered on Jan 10, 2009


Sounds like your chain is too loose, try tightening it.

Dremel Variable... | Answered on Jan 05, 2009


He obviously means connecting a ROUTER to a computer, as in a wireless router? This will never get answered here!

Dremel Variable... | Answered on Jan 01, 2009


I'll answer last question first. They might be cracking because they are in a bind and when turned on or inserted on the shaft there is too much pressure. Make sure the shafts are free of any debris from the original coupling, also check the bearings for wear or being so tight that they twist the coupling. Everything should move freely. And second I would recommend calling Dremel direct at 1-800-437-3635 for replacement parts. Hope this helps.
Dave

Dremel Variable... | Answered on Dec 26, 2008


Call Dremel at 1-800-275-2052 and they can help with parts and schematicsHope this helps. Dave

Dremel Variable... | Answered on Dec 24, 2008

Not finding what you are looking for?
Dremel Variable - Speed Multipro Rotary Tool 395 Logo

197 questions posted

Ask a Question

Usually answered in minutes!

Top Dremel Tools & Hardware - Others Experts

cluffermon

Level 1 Expert

4 Answers

Mike

Level 3 Expert

4363 Answers

Van Allen II
Van Allen II

Level 2 Expert

273 Answers

Are you a Dremel Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dremel Tools & Hardware - Others

  • Dremel Tools & Hardware - Others

Most Popular Question

flexible extension not working dremel

  • Tools & Hardware - Others
Loading...