20 Most Recent Dremel Variable - Speed Multipro Rotary Tool 395 - Page 2 Questions & Answers


You will have to remove the plastic cap on the end of the tool where the tips go in. Then screw on the cutting guide.

Dremel Variable... | Answered on Aug 27, 2014


I have a Dremel 395 Type 3. Motor works fine, shaft doesn't turn. Took it apart to find that the white plastic or nylon flex coupling on the shaft had crumbled and the spline driver, which fits directly over the motor end of the shaft was somewhat worn. I emailed Dremel and got an overnight reply listing the 2 parts I need and the cost: Coupling is $1.00 and the driver is $1.25. Placed order by phone: 1-800-437-3635. I ordered 2 of each in case future replacement is needed. Total bill came to $7.27 including Florida tax and shipping. Can't beat that. They said it would be in the mail by tonight. (Flex coupling number is 2615294309; spline driver is 2615294308.)

Dremel Variable... | Answered on Jul 25, 2014


Lowes, home depot and Sears sell them. Also, dremel.com sells parts.

Dremel Variable... | Answered on Jul 22, 2014


Perhaps you are bending the shaft too much, or the original lube in the flex shaft has been compromised. Take it back to the dealer, for an exchange.

Dremel Variable... | Answered on Jul 13, 2014


Burnt out brushes.

Dremel Variable... | Answered on May 08, 2014


I don't know about purchasing one, but you may download a free copy of the manual from http://www.dremeleurope.com/za/en/ocs/product/7359/2/multipro/dremel%C2%AE-multipro%C2%AE

Dremel Variable... | Answered on Dec 15, 2013


dremel have a collet adaptor available to allow interchange of bits. They are available from dremel or hardware stores.

Dremel Variable... | Answered on Aug 09, 2013


Press release button and hold down while unscrewing bolt. Continue to hold button and unscrew bolt until tip is loose enough to pull out if it still won't come out unscrew all the way, take bolt off and pull out tip with channel locks. It just got jammed in when tightening because diameter is probably a little wider

Dremel Variable... | Answered on Mar 16, 2013


Hi Larry, The tool that you require parts for was discontinued many years ago. Limited parts are available from Dremel. Inside the tool is a flex coupling and spline driver. The flex coupling is # 2615294309 and the price is about $ 1.25. This is the hollow plastic sleeve about 1" long with grooves on the inside, that goes between the motor shaft and the output shaft. The spline driver is # 2615294308 for about $ 1.00. Spline driver sits on the direct end of the motor shaft. The flex coupling sits over the spline driver. Spline driver is about 1/4", hard plastic with grooves on the outside. Total shipping for orders under $ 5.00 is $ 2.50. Orders over $5.00 is $ 4.00. There could be a tax charge depending on which state you live in. Here is how to order: Call Dremel Customer Service at 1-800-437-3635 , Monday-Friday from 7 am to 6 pm central time. VISA, MasterCard or Discover to place a Visa, MasterCard or Discover order. To order by mail: Dremel 4915 21st Street Racine, WI 53406 USA 1-800-437-3635 ext. 3636

Dremel Variable... | Answered on Feb 14, 2013

Not finding what you are looking for?
Dremel Variable - Speed Multipro Rotary Tool 395 Logo

197 questions posted

Ask a Question

Usually answered in minutes!

Top Dremel Tools & Hardware - Others Experts

cluffermon

Level 1 Expert

4 Answers

Mike

Level 3 Expert

4363 Answers

Van Allen II
Van Allen II

Level 2 Expert

273 Answers

Are you a Dremel Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dremel Tools & Hardware - Others

  • Dremel Tools & Hardware - Others

Most Popular Question

flexible extension not working dremel

  • Tools & Hardware - Others
Loading...