20 Most Recent
Makita 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140 - Page 6 Questions & Answers
Makita drill cordless smoking
The brushes are probably wearing out. They can also smoke if they get dirt or something on them. You can take the drill apart and replace the brushes, but if they are just burned some, take some fine sand paper or emery cloth and polish the armature where they run and clean the brushes and reinstall.
Makita drill 8903d
you can try going to either makitausa.com or ereplacementparts.com for a parts diagram. Let me know if you need more assistance.
Replace power cable 8406c
just grab a short extension cord and open up the drill and cut the female end off the extension cord and either solder it in or crimp it in if that seems doable. If it runs in reverse switch the wires.
Makita XPH01 chuck & motor are jammed
I would say it has stripped a gear and it jammed up. If this has happened , it would be cheaper buying a new drill. Try using a pair of multigrips to force the chuck around. If you get it free and the drill runs again, it could have just "jumped a tooth" and may be OK. If it crunches and locks up again, its rubbish bin time.
Not finding what you are looking for?