Lorex SG6153 / Weather Resistant Mini Color Camera with Night Vision - Answered Questions & Fixed issues

This camera demands a 9V DC 200mA. Not 12V.

POWER RED IS THE +POWER BLACK IS COMMON SIGNAL YELLOW IS + VIDEO GREEN IS -VIDEO

POWER RED IS THE +POWER BLACK IS COMMON SIGNAL YELLOW IS + VIDEO GREEN OR WHITE IS -VIDEO

POWER RED IS THE +POWER BLACK IS COMMON SIGNAL YELLOW IS + VIDEO GREEN IS -VIDEO

remove the outer cover of the DVR try to find the on board battery remove it for about 5 sec or 10 sec (while power off)

Standard cctv camera wiring red for + 12v black for comm yellow for + v (+video signal) white for -v (-video)

www.mace.com/software-downloads.html

The RED wire is your 12 volt power "positive". The BLACK wire is your 12 volt power "negitive" The YELLOW wire is your camera video. The white wire is your cameras audio & the copper wire is shielded ground.{Davesajak}

Red & Black is the power wires (Red +) & (Black -). The other two wires are probably the video signal (normally green & white). If you have a separate coaxial connection for the video signal, the other two wires could be for zoom lens control.Look up the make & model on line and check out the specs. Hope it helps. Ed

I HAVE A SECURITY CAMERA GOT WITH THE WIRES RIPD FROM BACK OF IT 4 WITH WIRES 1 RED 1 WHITE 1 YELLOW AND 1 THICK BLACK WIRE HOW CAN I REWIRE IT?????

you need power to the red and black, white to a rc plug center pin yellow to the center pin of a rc plug and there should be a bare wire you need to split it off to the outside section of the yellow and white rc plug

Okay - from a google search placing the information
Lorex SG6153 into the text box came up with the web site below.

http://www.google.com/products/catalog?hl=en&q=Lorex+SG6153&um=1&ie=UTF-8&cid=3330978625885084760&ei=zLwIS5CQDZCINKyPlLoK&sa=X&oi=product_catalog_result&ct=result&resnum=4&ved=0CBkQ8wIwAw&os=tech-specs

Here it gave me the specs that you have:
RCA jack output for your Video output connection
RCA Jack for both Left and Right Audio outputs.

So you will need to have Auxillary video and audio inputs on your TV. Most Tv''s have RCA Video and Audio inputs - many so you can connect your VHS player into the TV.

So - If you go to a local Target, Wallmart or even better yet Radio Shack or Best Buy. You will be able to obtain/purchase RCA male connector to RCA male connector cables. Many of these places have them in all kinds of lenths 'most common is 6feet'.
Many of them have all three connector's/cables together.
Yellow end is for the video
Red end is for the Right Audio
White end is for the Left audio.
Hope this all makes sense?
Blessings,
A/V Media Guy

The Lorax MC2700 is a portable radio that does not have Wi-Fi or Bluetooth connectivity. As a result, it cannot be viewed or controlled from a phone or other device. It can only be controlled using its physical controls

If your Lorex DVR won't turn on, it is likely that the power cord is not properly connected. Make sure that the power cord is securely connected to the DVR and that the power switch is in the "on" position. If the problem persists, you may need to replace the power cord or contact the manufacturer for assistance.

https://help.lorextechnology.com/link/portal/57356/57366/Article/1299/DVR-NVR-Default-username-and-password

Not from us! We are Fixya dot com, we aren't Lorex. Here is a link to their Support. https://help.lorextechnology.com/ ..

Lorex Firmware Updates ' Lorex

www.lorextechnology.com > support > Firmware

download the lastest firmware for you lorex products such as dvr, nvr and security cameras, you will be able to upgrade your system upgrading your firmware.

Contact Lorex directly to request a manual for model SG6153.

Contact Lorex directly to inquire.

Free online instructions: https://www.lorextechnology.com/downloads/discontinued-b4-2010/SG6153_TRIFOLDQSG_EN_R6_PAL.pdf