20 Most Recent Sentry Fireproof Safe - Page 7 Questions & Answers

lost key know code cannot open

This document might be of help - you'll have to determine which is your proper setup.

http://www.sentrysafe.com/pdfs/OwnersManuals/IntBarracudal.pdf

http://www.sentrysafe.com

instructions are located link above.

mj

It would be cheaper to buy a new one.

To change the code: Your safe comes
preset with the default code of “159-A”.
To change the code, first open the safe.
On the inside of the door near the hinge,
there is a small red “reset” button. Press
this button until the Yellow LED on the
front panel lights up. Now, input your new
code up to 8 characters, followed by
either “A” or “B”. The Yellow LED will flash
to indicate that your new code has been
accepted. Warning: If the Yellow LED
does not flash, the code has not been
accepted, and you must start over.
NOTE: Be sure to test your new
combination before closing the door.
NOTE: Be sure to have the Override Key
available when setting a new
combination or changing batteries, in
case the door doesn’t open.

Good Luck

replacement keys can only be made by dealers, hardware stores and locksmith.a locksmith will go to your car open it extract the key switch and make you a copy.

Call 1-800-828-1438 with the serial number of the safe.

A1 Locksmith Google

Our tech at Quality gun safes wall safes and floor safes advise you to check the back of the safe door for a set screw. Remove this screw to lock the door. The screw prevents lockouts during shipping and in store displays.

Our tech team at Quality gun safes wall safes and floor safes store in Burlingame Ca produced this video

Locksmiths recommend waiting until the time out wrong code entered period expires. try it again in about an hour

everyone's silly talking about rendering the safe useless ha!. dont wanna pay the 25 dollar fee???? still want ya safe open???? All ya gotta do is this.... take a flat head screw drive to the upper black handle plate n pop it out safe will open... when done put bar back in and safe is like new!

Use paperclip to push in pin size hole below keyboard and then slide panel to right. Battery box is right there. Replace batteries and then was already to accept code.

You will need the model and serial number as well as proof that you are the owner which can be by a witnessed, notarized letter. This is also not free, but the charge is nominal. Sentry will accept a call, fax or check for payment. Exact details can be obtained by contacting Sentry customer service @ 1-800-828-1438 or 1-585-381-4900. 8am-8pm EST m-f