Top 20
D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B) Questions & Answers
RE: ADSL2+Modem. I'm able to do your quick
Lynne,
First you need to delete your phonenumber from this post. This is a public post accessible from all over the globe.
Second you need to contact your ISP with this problem. It might be that your ADSL modem isn't compatible or wrongly configured for your present connection.
Help setting up wireless to adsl
you should access your Router.
To access it go to
Run > CMD
type "ipconfig" there
Search for the connection that you are using and get the Default Gateway.
It should be 192.168.0.1
Open a web browser and type 192.168.0.1 , press enter.
If it requires a username and password type admin / admin , or admin and leave password blank.
Then go to the wireless settings and configure them.
You can do all of this with your PC and router connected by a LAN cable.
Telkom line cancel
Hi Anonymous
I trust you are well.
Try calling 10210
Hope this helps
Kind regards
Cannot access my e-mail or send
If you can connect to the Internet then the problem is most likely the configuration of your email client. You want to make sure you have the correct settings for your incoming and outgoing mail servers in your mail client. The Standard port used by POP3 is 110 for incoming mail, Outgoing SMTP server uses Port 25. Make sure your router doesn't have these ports blocked
D-link DSL 2730u modem dead after wrong firmware update through wireless
Attempt to do the firmware update, again--connecting always to ethernet for firmware updates. Unfortunately, your modem may be "bricked" (unusable)--in other words, it may be time to recycle it and buy a new one.
The firmware may proved damaged--given that the incorrect firmware successfully installed (hopefully, that was prevented by the device itself--it may have output an error message or code)--or, it was installed incompletely, or the update proved corrupted.
How do i check what devices are using my wifi
Log in to your DSL-2640B (Default IP is typically: 192.168.1.1).
Click Status from top menu and then Connected Clients from the left menu. Here you will find who have acquired IP-addresses from you router.
D-link router power light is red
The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset
If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.
Ordered and paid for a book called"Alone" for my kindle but cannot access it on my kindle
Hello Jill. I have found in my case that some books would not open because the format file extension was incomplete. Most of my ebooks are in the .epub and .mobi format.
Example: Star Trek_ Abramsverse - 01 - Star Trek - Alan Dean Foster.epu
Notice at the end of the book title and author you see the format
file extension .epu here the 'b' is missing and must be added.
Star Trek_ Abramsverse - 01 - Star Trek - Alan Dean Foster.epub
If that is the problem the book should now open.
I am unfamiliar with the Kindle ebook reader. I use the free Calibre ebook reader program on my computer. But I can show you how to edit the file extension on a computer. If the file extension is not shown it is because it is hidden. First we must unhide them.
Windows XP: at the top of your window you will see the toolbar: File Edit View Tools Help Click 'Tools' then 'Folder options' then click the 'View' tab.There you will see boxes with check markes in them.
Find the box 'Hide extensions..' and make sure it is unchecked. Then click 'Apply' then 'OK'. You will now be able to edit the file extension.
Vista & Windows 7: If you do not see the toolbar above, click 'Organize' at the top left There you will see 'Folder and search options', click it.
There are other file extensions used in addition to those above and you must know what they are. When downloading ebooks from the net they generally give two or more file extensions to chose from. Good Luck
Red flashing light on D-Lonk wireless router dsl-2750b
Means you have no internet connection. Try a new LAN cable between you router and internet modem. Connect directly to you internet modem make certain it is working. Reboot both devices.
The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset
If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.
Not finding what you are looking for?