20 Most Recent
LG GSA-H42N 18x DVD RW DL IDE Drive (Black) Burner - Page 3 Questions & Answers
Driver cannot start. driver seams to be damaged.
Was there a previous problem that prompted you to upgrade the driver? Sometimes an older driver works best. Please let me know what type of Operating System you have and if this was a driver update, or a new DVD drive install.
I lost the drivers what can i do?
well you really don't need drivers for xp+ systems. it should automatically be recognized. you just have to get cd/dvd burning software like Nero.
according to this site that drive won't be recognized by vista with out a firmware update
http://www.cdfreaks.com/review/13311-LG-GSA-H42N-Super-Multi-DVD-Writer-Review/
Dvd writer is not reading any cd
try re pluging in the ribbon cable make sure it is in right. then put a know dvd intothe drive and see if it reads it if it don't then the drive is bad the 16 speed has a stand alone driver so you could try reinstalling the drive also check that the DVD player is not disabled in bios.
Cd is not reading by dvd writer but dvd is running smooth
1.when you write on dvd writer always select low speed to write such as 8x or 16x
2. most of the dvd writer do max speed while wrting the Cd or Dvd
3. due to this reason your cd is not reading
4. you can try a new disk write in slow speed,then check with your cd.
My gsa h54n dvd writer cd not reading but dvd
Sounds like the drive either doesn't like the disk you are trying to use or the cd laser has burnt out. Try the disk in another machine if you can, if it works ok then replace the drive.
It need upgrade
THESE ARE EASY TO REMOVE OLD UNIT AND RE-INSTALL NEW . IS THIS IN A LAPTOP OR DESKTOP ?
Not finding what you are looking for?