20 Most Recent Durabrand DU1301 TV - Page 3 Questions & Answers

Call the customer service number on the back of the set.

Call the customer service number on the back of the set.

Call the customer service number on the back of the set.

Call the customer service number on the back of the set.

No. You will need a digital converter box for digital reception.

For the answers you seek, call the number on the back of the set this week.

Try a RCA universal remote with an input button. Try the codes for Orion , Sansui and RCA. Access the menu by holding down both volume buttons on the front of the set. There is no access to the jacks on the front of the set without a remote. If all else fails get a RF Modulator. This will allow you to watch your dvd by using the antenna jack on the back of the set.

Call the phone number that is on the back of the set.

press volume up and down at the same time and the menu should apear youll know what to do next.

I own a One-for-All universal remote, and my booklet says the setup code for a Durabrand TV (without a built-in DVD or VCR) is one of the following numbers: 0171, 0178, 0180, 0463, 1034. I can not guarantee that these numbers will work with your remote, but it is worth a try.

Try turning off the dvd/vcr and put your tv on the output channel of your DirectTv receiver. If this doesn't work it may not be hooked up correctly.

Yes, if you use an antenna.

Go into the menu to channel setup and change the setting from tv back to cable(catv).

I went to DTV.gov and got a coupon to buy a computer box for the change in Feb. 2009.

Try Emerson codes for the DU1301. 092 worked for me with my Brookstone remote

Sorry to say but it is very hard to get parts for this brand. I don't take them for repair anymore. I have a few Duraband remotes. If you can give me the model number of yours, maybe I have a matching one for you.

Orion builds that unit and I can not find an owners manual online for it anywhere. If you want, you can buy on here: http://www.orionsalesinc.com/miva/merchant.mvc?Screen=CTGY&Store_Code=OSI&Category_Code=DU1301 It should tell you in there how to go about deleting and adding channels.

The easy way for most of the TV's to delete a channel is to go into Menu on your remote and go to Add/Delete channels. Once you are in this screen you should have an option to delete a channel. Press that and type the channel number to be deleted. It should work. Good luck.

if your Durabrand TV model ON32F6000D offers updates via USB also, Make sure the USB drive is empty and has enough space to accommodate the firmware update file. then Copy the downloaded firmware update file from your computer onto the root directory of the USB flash drive

Six AA batteries.