Sony Ericsson HBH-PV705 Headset - Answered Questions & Fixed issues
Hbh-pv705
I had this problem. I fixed it doing follow: hold volume keys together, so the indicator is flashed red and green (reset to default settings mode). Then press power button to turn the headset off. Then turn it on again and try to find the headset again from my phone. Then select "pair" from phone menu and typed "0000". The led stopped flashing and headset was connected. Before this my phone couldn't see the headset at all. Hope it will help you! (sorry for my English, I'm from Russia =))
I am connected bluetooth device HBH PV705 in
run microsoft updates on your computer 1. control panel 2. system and secruity 3. windows updates f that doesnt work to the manufators website and download the date drivers hope this helps
The ear hook on my model has broken but all else
Yep. Buy it here from a danish webshop:
http://www.gooby.dk/ write 8829 in the search area (you can put Google translation to english on, page is on Danish) Best Regards Henrik from Denmark ps. and if you buy a minimum of 2, you can have 50% discount by using THIS code 96f7f8ff - use it in the payment area... :-)
I cannot pair my Nokia N95 with HBH-608 Akono headset
Press and hold down the headset volume key in the centre. Hold it for about 5 sec. The led will now flash on/off in red. This is the pairing mode. Set your mobile phone to blue tooth discovery mode,until it finds the headset, key in the pass key, 0000. It should now work. You may need to set the phone to select the headset as an automatic connection so it connects whenever it is on and in range.
Bought a sony ericsson bluetooth
To turn this headset on you simply press and hold the Call Handling Button for 5 seconds. If it turns on it will make a beeping tone and flash green.
Sony Ericson 250i Headset not recognised
The wire to headsets can get damaged (usually not visible from the outside, as the wires inside the covering can be very delicate, to keep the size of the wire down) from throwing them in the pocket, purse, etc. Try a set from a friend to make sure the device is still working itself.
Icom IC706mk2g Transceiver does not transmit in SSB (Single Side Band) (USB & LSB)
First, make sure that the microphone is properly connected to the transceiver. Check all the connections and ensure that there are no loose cables.
Next, check the settings on the transceiver to make sure that it is set to SSB mode. Sometimes, the mode settings can get changed accidentally, so it's important to double-check.
If the issue still persists, try resetting the transceiver to its factory settings. This can sometimes resolve any software glitches that may be causing the problem.
If none of these steps work, it's possible that there may be a hardware issue with the transceiver. In that case, it's best to contact a professional technician for further assistance.
3/28/2024 10:24:30 AM •
Radio...
•
Answered
3 hours ago
•
23 views
Serial Number for KPG-790
All questions need FULL 'make model (what it is) first 3 words please.
Something to do with this? The serial number should on the label on the rear by the mains cable. This is a statutory requirement unless someone removed it to hide its identity.
https://www.google.com/search?q=KPG-790
..
2/15/2024 3:06:45 AM •
Radio...
•
Answered
on Feb 15, 2024
•
27 views
Not finding what you are looking for?