20 Most Recent
HP Compaq Motherboard - Page 7 Questions & Answers
My hp computer is working
1. Initially first identify which program is consuming more physical memory.
2. Slowness could be also due to virus attack.
Please confirm me on the 1st part.
10/30/2010 9:04:24 AM •
HP Compaq...
•
Answered
on Oct 30, 2010
Cant boot up
There could be several reason for not able to boot up.
1. the power to the unit is not there
2. the monitor is not working so you cannot see anything on the screen and believe it is not booting up.
3. the hard drive is faulty and therefore the system cannot boot.
If you believe 1 and 2 are not the cause and assuming the keyboard is working, then press F1 or F2 immediately when the bootup starts. This will take the system to BIOS setup. Choose boot sequence to boot from CD (or floppy if you have drive). Next insert Windows CD into the CD drive and exit and save BIOS setting. When the boot sequence starts it should boot from CD.
IF this fails then the motherboard is faulty. If it works (ie. it boots from CD) then the hard disk is faulty.
Please rate this solution to help fixya serve you better in future.
10/10/2010 4:37:45 AM •
HP Compaq...
•
Answered
on Oct 10, 2010
Get an error with installing windows xp on a HP NC
One bad lead will cause your computer to continue in a cycle
replace all the leads that attach to your hard drive including electrical extensions + IDE,SATA and the ones that attach from your motherboard to hard drive
hope this helps
9/18/2010 11:25:09 PM •
HP Compaq...
•
Answered
on Sep 18, 2010
Cannot boot from the windows
it
Replace your PSU then test all leads that are attached to your hard drive sounds like a faulty lead of some sorts then
try replacing all the leads that attach to your hard drive including electrical extensions + IDE,SATA and the ones that attach from your motherboard to hard drive
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they are probably old and faulty because a computer has to have an end to the circuit any fulty leads will lead to no boot up
good luck
9/15/2010 9:24:26 AM •
HP Compaq...
•
Answered
on Sep 15, 2010
Not finding what you are looking for?