20 Most Recent HP Compaq Motherboard - Page 6 Questions & Answers

In computer Hardware Field major problem occur in Display and there is lots of reason behind it.May following list help full to you. 1) May be virus problem is occurred, Do perform boot level scanning by prober antivirus. 2) Display IC burn out. 3) Data cable may be burn out. 4) Problem in motherboard. 5) Any problem in RAM. 6) Any Problem in Hard Drive 7) May over heating processor.Use proper heat sink FAN. 8) Remove Dust from all the ICs , components , Processor , Because of dust more Heat is occurred. 9) Some time because of confliction , Because of any device like keyboard, mouse , Display problem has occurred. 10)Check out all capacitors , Resistors , Ics on the motherboard, It any burn out then replace it.

The MS-7525 is not a retail motherboard, it's an OEM motherboard that MSI custom built for HP/Compaq and called the Boston GL6 by HP.

Motherboard specs: http://h10025.www1.hp.com/ewfrf/wc/d...752001&lang=en

In order to see what drivers are available, you must visit the HP/Compaq website and type the pc model number into the box, then click NEXT.

http://h10025.www1.hp.com/ewfrf/wc/s...en&lc=en&cc=us

Note: MSI doesn't provide support for OEM boards, they leave support to the vendor. And unless HP shipped your pc with Windows XP installed, they won't offer any XP support. If you are trying to convert the machine from Vista to XP, why not just say that's what your trying to do?

Hope This Helps
:)

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your "((motherboard to your hard drive))" make sure they have a secure connection and are not faulty or just replace them they could be faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error hope this helps

Sounds like you need some drivers, I assume all the connectors are correctly in place. If you can goto your device manager and see if there is a small yellow triangle with an "!" in the middle. Right click on this and search for drivers. If that doesn't work it'll be your chip set drivers. Look on the motherboard or use a program like CPZ to find out your motherboards model, go on HP's website and find the dirver. install manually.

If your computer was not supplied with a Windows CD then mostlikely the hard disk on your computer has a recovery partition on the hard driveand you can restore your computer back to the condition when you first purchasedthe computer using this recovery partition.
HP can also supply a recovery CD for your model computer if you request one.This is needed when the hard disk has failed.
Read your computer documentation for the instruction on the restore procedure.You also get this information from HP's WEB site.

You can download the device drivers from theCompaq/HP WEB support/download page. Make sure you select your model motherboard andthe Windows drivers you require and install them. Click on this link todownload the drivers: -
www.compaq.com/country/cpq_support.html

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3747172&

best regards

The download site for your product is here:

http://h10025.www1.hp.com/ewfrf/wc/pfinder?lc=en&dlc=en&cc=us&tool=&query=MS-7525#N29

You can select the model of your pc,or you can use the autodetect function.
And select your operating system.
In order to find the right driver.

Hope this was helpfull.

if your computer came with a motherboard disc the sound drivers could be on it click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers also

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electic extensions or just replace them they are probably faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error hope this helps don

Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers also

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they are probably old and faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error also click start control panel administrive tools computer management device manager scoll to ports(com&lpt)right click to scan for hardware changes or scroll to monitors + to expand plug and play monitor right click where you have options to update driver,disable.uninstall,scan for hardware changes or select properties where in the general you have the option to troubleshoot also in the driver tab you have the same options as when you first right click on monitor also click start control panel,display,desktop you can select a different desktop from the drop down list also settings you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size,larger size or custom settingsalways click APPLY after making any changeshope this helpsdon't forget to vote

You can find a driver here:

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=96221&taskId=135

By selecting the right model.

Good luck.

You can download the drivers from the Compaq/HP WEBsupport/download page. Make sure you select your model motherboard and the XP Windows version of the drivers you require and install them. Click onthis link to download the drivers: -
www.compaq.com/country/cpq_support.html

the driver should be on the motherboard disc or the one supplied by your ISP internet service provider click start control panel admistrive tools,computer management,device manager scroll down network adapters + expand Ethernet driver right click you will have options to update driver,disable,uninstall or select properties general you will have the options to troubleshoot or to update driver,rollback or uninstall a yellow? question mark means you need to install/update driver right click to install driver hope this helps don

You need to provide the stop error code and the technical information that you are getting on the BSOD screen. Because the troubleshooting varies for different error codes. You can try doing a bios default and after that u can go to safe mode with networking and from there u can go to the hp website to find the latest update for the bios of the pc.

Do you have a usb or ps/2 mouse and keyboard?

You can download the device drivers from the Compaq/HP WEBsupport/download page. Make sure
you select your model motherboard and the XP Windows version of the drivers you require and install them. Click onthis link to download the drivers: -
www.compaq.com/country/cpq_support.html

reinstall your windows

i,

To reset the bios password on your laptop, you will need to remove the cmos battery on your laptop for some minutes and insert back, the cmos battery is located on the motherboard of your laptop, once the cmos battery is removed from the motherboard for some minutes, the bios password will be reset, and that fix the problem.

What device drivers are you needing?