Intel D945GCCR Motherboard - Answered Questions & Fixed issues

Hi,
Appki operating system select karke apna sound driver download kar lena.

Yaha Per Click Kijiye

Thanks

http://www.manualslib.com/manual/440611/Intel-D945gccr.html A MANUAL.

Check memery

go here under download software http://www.intel.com/p/en_US/support/highlights/dsktpboards/d945gccr

http://www.intel.com/p/en_US/support/highlights/dsktpboards/d945gccr

here you go https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+945+Express+Chipset+Family+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+D945GCCR&ProdId=2766&LineId=2424&FamilyId=36

go to intel then support then download bio

www.intel.com/...port/highlights/dsktpboards/d945gccr this link will show you d950

http://www.intel.com/support/motherboards/desktop/d945gccr/sb/CS-026626.htm FIND THIS.

web site of intel then support then discontu.board then hit d945gcc then download bios you sould download all updates as will

u dont need a driver if u r using windows 7 or 8check intel.com support or go to realtek's website u will get ur driver

that is a pci card right should fit in a pci slot then install drivers

sir mujy urdu mien notes ki zarurat hai electronics ke ley ye bta dyn k khan se download krne hain

Hello you have to enter the bios option to change the bootup settings.Press the DEL or F2 button to enter the bios.Next select the boot option, and make the DVD drive as first boot device, harddrive second.Leave the bios by saving the settings you just made.Place the windows disc in the dvd drive, and reboot.The screen turns black, and a small text comes on top:Press any key to boot from disk, use the space button.Now the installation will start.Remember to format the harddrive, when prompt.The drivers can be downloaded here:https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+945+Express+Chipset+Family+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+D945GCCRBest of luck

specify hardware .... manfacturer .... information ?

gfdtedtdfgdtjrjfhj

Add a USB PCI card. If the USB ports are not working, you have a problem with part of a chip on the motherboard. It is not viable to replace.

usually there is jumpers on the motherboard where you just move the jumper that says clr_bios or CLR-password, sometimes you have to do that, and remove the cmos battery.

Hi.XP will not install until you go into the BIOS and find the menu page (probably by moving across the top level of tabs) where the SATA hard drives are configured. On that page you will see the ports and at least one, maybe all, will be Enabled. Close to that will be the port mode, usually setable individually for each port. Choices may include IDE (or PATA) Emulation, SATA, AHCI. Set your port to IDE emulation. Now look at the bottom for the key to Save and Exit - often the F10 key, press that key and select OK, the computer will restart and you should now be able to install Windows XP without any problems.To get into the BIOS you have to press the Del or Esc key when you first turn the computer on.Regards.

Hello download here at intel:http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+945+Express+Chipset+Family+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+D945GCCRReboot after the install is done.Good luck