20 Most Recent
Seagate FreeAgent Pro Desktop - 320GB - 7200rpm - 480Mbps USB 2.0, 300Mbps External SATA ... Hard Drive - Page 8 Questions & Answers
Refer Acer m3970
Can not Install windows 7 of new hard drive
Factory back-up discs and recovery discs are intended to repair defective installations or to kick-start an installation that refuses to start so it is unsurprising they will only go so far.
Your system disc might be defective. This is a problem I have had with XP in the past. It is possible your CD/DVD drive has a dusty lens and is unable to read the disc properly or perhaps the new hard drive has a problem.
I suggest you instal the new hard drive as a slave in another computer and format it and run the chkdsk utility. If all is well reinstal in your computer.
Take a close look at your system disc checking for flaws and perhaps put a lens cleaning disc in your CD/DVD reader before trying again.
10/28/2016 12:10:44 AM •
Seagate...
•
Answered
on Oct 28, 2016
After I format my hardisk for several times and
Install the drive on a working computer and access through disc management. that will allow you to initialize the drive and format it ntfs. Goto my computer right click select manage select drive management. This works on XP if you have other OS than search for disc management for your OS.
7/18/2016 9:07:27 AM •
Seagate...
•
Answered
on Jul 18, 2016
I can't get my seagate backup drive to backup my files?
You would be better served if you backed up your whole drive.
Actually the whole Windows partition (EG C Drive)
Get a couple of Seagate external 2TB drives (not portable ones, the bigger ones the size of a thick book. 3.5" drive inside)
Partition the drives to NTFS (FAT has a file size limit of 4GB)
Download the free Seagate DiscWizard program -
http://www.seagate.com/au/en/support/downloads/discwizard/
Install the program, and immediately after when it is running choose the option to create a bootable CD.
There is a sub option to set the CD to default to boot into into the mini OS. If you don't set that you have only a few seconds each time you boot the CD, to avoid it booting into windows. I can help you with that choice, when you are ready to create that CD)
I always use the bootable CD to create an image, and to verify that image. (You don't want Windows running when imaging.)
If later you need to restore an image, you again do it from the bootable CD
The reason to have two external drives, is to alternate which one you create images in.
You should also copy your big files from your C drive into both external drives, and then delete them from your C drive. That will mean your C drive images will be smaller, and quicker.
If you do images every day, you are protected against -
- You corrupting/deleting important files
- Virus/Trojan attacks
- Ransom ware
- Hard drive failure
- Etc
Yell out if/when you need help,
Rob
1/6/2016 10:33:19 AM •
Seagate...
•
Answered
on Jan 06, 2016
What external drive enclosure would support a seagate 4200.2 hard drive
Hi Larry
There are generally 2 types (sizes) of hard drive. 2.5 Inch & 3.5 inch. Any 3.5" HD enclosure these days should handle either size.
The preferred current connector on a HD is SATA (Serial ATA)This small connector on the HD is universal so it's easy to connect a drive. 3.5" HD is preferable for backups & archive as it is faster, more reliable and less prone to bumps. They run on 12v&5v
The Pocket type 2.5" run on 5v and are not as fast or secure.
My preferred Enclosure that I use is more of a Universal Dock.
Either drive can be plugged in at any time. This is great for allowing the use of several drives for different purposes. Eg
A Movies Drive. A Backup Drive. A Music Drive or a Bootable External OS in case of problems. Buy USB3 Port Interface where possible or FireWire as the backup speed is Faster
Drives not in use get wrapped in antistatic bag or tinfoil & kept in secure location.
I use Carbon Copy Cloner to make a Bootable copy of OSX.
Great program... used it for years. Demo is free and fully usable.
Hope this helps
NewerTech Voyager S3
Mac Backup Software
NewerTech Voyager S3 Hard Drive Docking Solution USB 3 0
12/2/2015 4:47:53 AM •
Seagate...
•
Answered
on Dec 02, 2015
I/O device error
1. What are you trying to backup?
In addition to Andy's suggestion, I'd suggest you put your computer in a clean boot state and try to do backup.
Note: Follow step 7 to restart your computer as usual.
for more help visit
CBR Tech Solutions
11/24/2015 7:45:14 PM •
Seagate...
•
Answered
on Nov 24, 2015
HOW TO RETRIEVE A PASSWORD FROM, OR CHANGE THE PASSWORD ON A WIRELESS ROUTER
How to retrieve a password or change the password for a wireless network from the router
Get an ethernet cable and plug your computer to the router with it..Click on your browser and in the address bar type the IP address for your particular router. (You can find this by googling the make and model of your router and the words IP ADDRESS.)
you will then be presented with the page after which you will have access to the router's control software. The page asks for username and password, they should, if they have not been altered from default, both be the word admin
Having entered these and pressed the enter button you should be in the control menus. Look for the wireless networking option, find it , click on it and you should find yourself in a screen on which your network's ID, (also known as SSID,) and password are displayed.
There may or may not be the option of turning the radio / wireless section off
temporarily...if it is available click on it to stop the wireless from broadcasting...if the option is not listed it obviously cannot be done!
Next, highlight the network password and delete it, then insert your new password, making a note of it and remembering that it will be case sensitive.
Make sure you SAVE THE CHANGES
Next ... If you have shut wireless/radio down reactivate it.
Then exit the utility.
Advanced users might want to create a password for getting into the router.
Anyway,after having exited detach the ethernet lead and click on your browser and click on the wireless networking/connection icon in the system tray, highlight your network and click on the connect button. You will then be presented with the option of entering your new password which should be entered exactly as you wrote it when in the router. You should, after a wait of a few seconds, be connected to the internet. Hide the new password and your ethernet cable if you have not put a new admin password on the router.
Then, BOBS YOUR UNCLE.
How do I delete all files on my Freeagent 320gb
really, ALL? use the quickest and simplest way is: remove all partitions on your HD then create a new ones with different sizes. But, if you're concerned with the content and want data to get completely wiped out then there're different procedures (depending on the level of your concerns).
5/10/2015 5:16:49 PM •
Seagate...
•
Answered
on May 10, 2015
Not finding what you are looking for?