Top 20 Kingston (DTIU3/2GB) 2 GB USB Hard Drive Questions & Answers

It sounds like you are experiencing an issue with your Kingston DT101 G2 flash drive, which is locked due to too many password attempts. The standard time that you will need to wait before you can try another password variation will depend on the specific settings of the flash drive. If you are not sure how long you need to wait, or if you have forgotten the password and are unable to access the data on the flash drive, there are a few options you can try:

1. Check the manufacturer's website. Kingston's website may have information on how to reset the password or unlock the flash drive if you have forgotten the password.
2. Contact Kingston customer support. They may be able to help you reset the password or unlock the flash drive if you are unable to do so on your own.
3. Use a password recovery tool. There are several tools available that can help you recover lost or forgotten passwords for various types of devices, including flash drives. These tools may be able to help you recover the password for your Kingston DT101 G2.

I hope this information is helpful! Let me know if you have any other questions.

In Windows Explorer, click the column heading for name. That should sort them by name.

try put it in a different pc and see or maybe it's full

Name: Kingston DT 101 G2 (USB2.0) Logic Driver: L:\ VID&PID: Vid_0951&Pid_1642 Speed: high speed VendorID: Kingston ProductID: DT 101 G2 Product Revision: 1.00 what s the softwar for this flash??

On the side of the flash drive there is a switch which you move to the front for write protected, just move the switch to the back you can write data to it again

Usually, it comes formatted. However, you can re-format it (e.g. on a PC or Mac) using the usual disk format utilities, if you don't need any special/specific (SDHC) format features. For instance, on a PC ... insert the USB SanDisk into a USB port. It will show up as a (storage) device on your "My Computer" window. Highlight that icon ... (put the cursor over it) ... and put your cursor on the FILE (menu) tab and click on it. It will display a drop-down menu with "Format" on it. Click on the "Format" and it will guide you through the formatting process. On a Mac, when you insert the USB SanDisk into a USB port, it will show up as a device on your desktop. You can use the "Disk Utilities" software (usually in the Applications - Utilities folder), to format it.

Is the pendrive locked? look at the pendrive for a switch with a picture of an open and closed padlock

my toshiba laptop 3.0 usb port not working

Hi, No issue Just connect you pen drive in PC/ laptop. And after that connect your pen drive go to pen drive icon and right click- property- and change name. Or simple way just connect your pen drive then press f2 and change name. Technical Support

If the drive is not detecting at all then the controller chip inside has failed. The best way you can recover this is to find another identical unit and remove the memory chip (it will be the larger of the two) from both drives and solder the one from the faulty drive into the donor, you will need soldering experience and a hot air gun to remove the chips (do not head these up too much, only enough to melt the solder) You will ideally have a electronics microscope to see the small pins that will be soldered. If this sounds like too much work, you could send it off to a data recover company such as ours at Digital Recovery

that is a fash stick memoryif you removed it , from the system with out ejecting it , you will scramble it (in comp. jargon that means corruption)try all USB portstry 2 systemsif dead, its dead, reformat it or buy recover software for flash stick memory.

ok try it different PC.s (simple huh?) if it's still dead, it is. reformat it.usually dead mem stickes are caused 99% by removing themwith out first clicking Eject on same. first.

mujhe pendrive bootable banana hai koi solution batao

http://www.filehippo.com/download_antivir/ Download Avira Antivirus on This link. Good Luck.

Click start control panel Administrative tools Computer Management Disk Management right click on your drive select properties click tools you should see click check now click start two boxes Automatically fix files and scan for and attempt recovery of bad sectors place then a tick in one box then select check now start then after its finished return and tick the other box you should not do anything while the chkdsk utility is in progress any input may damage this drive. You might get best results ticking in one box the returning after it has finished then ticking the other box. It might take some time depending on the size of your disk but be patient. Click start click to open on my computer you should see your usb drive F: or something right click select properties there will be an array of options select the sharing tab option then advanced sharing permissions make sure you have a tick in the share this folder box then click permissions make sure all three boxes are ticked you full control change and read in windows 7 Click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP also If you are running a Windows XP OS then you might be able to: Click start right click on my computer select open Right click the icon of your Flash Drive (It should be F: / E: or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. you might have restore it to its defaults Right click on usb drive select properties you will have an array of options Select the hardware option then select your drive properties policies restore defaults In XP Right click on your drive select properties then on customize restore Default in W 7 Click start click on my computer you should see your USB Drive right click then select format another way is to control panel administrative tools computer management disk management right click on your USB Drive select format usb chkdsk utility Click start control panel Administrative tools Computer Management Disk Management right click on your drive select properties click tools you should see click check now click start two boxes Automatically fix files and scan for and attempt recovery of bad sectors place then a tick in one box then select check now start then after its finished return and tick the other box you should not do anything while the chkdsk utility is in progress any input may damage this drive. You might get best results ticking in one box the returning after it has finished then ticking the other box. It might take some time depending on the size of your disk but be patient. then you restore it to its default status Right click on usb drive select properties you will have an array of options Select the hardware option then select your drive properties policies restore defaults In XP Right click on your drive select properties then on customize restore Default in W 7 you might have to alternate doing this repeatedly until you find the sequence to get the problem is resolved click start control panel scroll to folder options view place a tick in show hidden files folders and drives this may vary depending on your operating system if you need more help with this post a reply

You have to be the computers Administrator to change any values on any Hard Drive on your computer. Click start control panel user accounts on the users tab click the name of the computer Administrator you must have full control. Click start click to open on my computer you should see your Usb drive E: or something right click select properties there will be an array of options select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box then click permissions. Make sure all 3 boxes are ticked full control change and read in windows 7. Click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP. Click start right click on my computer select open Right click the icon of your Usb Drive (It should be E:/ or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. Click start click on my computer to open you should see your drive right click then select format another way Click start control panel administrative tools computer management disk management Right click on your usb drive select format. If you need more help with this post a reply

To solve the problem use HP USB DISK STORAGE FORMAT TOOL V2.1.8. You can find it at http://files.extremeoverclocking.com/file.php?f=197. Do not format your 32GB Kingston PenDrive with NTFS file system since it does not function. Use FAT32 instead.

if the thumb drive is not recognizing in your system then connect to some other system if its visible there recovery your data from there in some other storage media. And if it is not visible in the other system also then to save and recover your data use data recovery software.

You will need to connect / plug in your Kingston data stick to a computer once connected Click start all programs accessories open windows explorer navigate to your Kingston drive it could be E: or something might be listed as a mass storage device open it up you should see all of the data inside. First make a folder in your Kingston Drive click start all programs accessories My Documents you will see your Kingston drive open then right click select new folder and name Burn Back up for an easy location find. or click start click on computer you should see your drives and your Kingston Drive Right click on the data you need to be saved right click select copy navigate back to the destination drive it could be a another drive or E: drive in my documents right click select paste or hold the mouse cursor the Data drag them to destination folder then drop the Data in to your newly made folder Burn Back up back up. If you need more help with this post a reply

1. Verify that you are allowed to write to removable storage devices. There may be a security setting in the OS that disables write access to removable storage devices.
2. Make sure you have not enabled write protection on the drive by using a third party software.
3. If none of the above apply, the drive may be defective. Contact Kingston Technical Support for further assistance.