20 Most Recent Kingston (DTIU3/2GB) 2 GB USB Hard Drive - Page 2 Questions & Answers

try put it in a different pc and see or maybe it's full

Dear sir I am using kingston 2 GB USB pen drive it is suddenly not detected with my HCL leaptop. Plz kindly help me

please specify when you buy it and what is its make how much price its made in china,malaysia or taiwan.


[email protected]

On the side of the flash drive there is a switch which you move to the front for write protected, just move the switch to the back you can write data to it again

my toshiba laptop 3.0 usb port not working

Hi, No issue Just connect you pen drive in PC/ laptop. And after that connect your pen drive go to pen drive icon and right click- property- and change name. Or simple way just connect your pen drive then press f2 and change name. Technical Support

Is the pendrive locked? look at the pendrive for a switch with a picture of an open and closed padlock

Usually, it comes formatted. However, you can re-format it (e.g. on a PC or Mac) using the usual disk format utilities, if you don't need any special/specific (SDHC) format features. For instance, on a PC ... insert the USB SanDisk into a USB port. It will show up as a (storage) device on your "My Computer" window. Highlight that icon ... (put the cursor over it) ... and put your cursor on the FILE (menu) tab and click on it. It will display a drop-down menu with "Format" on it. Click on the "Format" and it will guide you through the formatting process. On a Mac, when you insert the USB SanDisk into a USB port, it will show up as a device on your desktop. You can use the "Disk Utilities" software (usually in the Applications - Utilities folder), to format it.

If the drive is not detecting at all then the controller chip inside has failed. The best way you can recover this is to find another identical unit and remove the memory chip (it will be the larger of the two) from both drives and solder the one from the faulty drive into the donor, you will need soldering experience and a hot air gun to remove the chips (do not head these up too much, only enough to melt the solder) You will ideally have a electronics microscope to see the small pins that will be soldered. If this sounds like too much work, you could send it off to a data recover company such as ours at Digital Recovery

How to convert 1 or 2GB memory stick into 4GB? Just follow the simple instructions: Step1: Insert your memory stick in USB port Step 2: Open the Drive increaser software folder (download the software) Step 3: Rename the Pendrive or memorystick Step 4: Open Drive Increaser 2 icon from the Downloaded folder. Step 5: The opened file is asks USB drive Name. (Before enter the name first Rename the Memory stick or Pen drive). Just enter the renamed pen drive name. Ex: 2341 Step 6: After that, it will ask USB pendrive letter (Ex: H or I or J). Repeat this two times Step 7: After Drive letter entry some process will be done with Red color like this image Step 8: Finally it shows Done Please enter any key to done.

Now your Pen drive is 4GB

that is a fash stick memoryif you removed it , from the system with out ejecting it , you will scramble it (in comp. jargon that means corruption)try all USB portstry 2 systemsif dead, its dead, reformat it or buy recover software for flash stick memory.

ok try it different PC.s (simple huh?) if it's still dead, it is. reformat it.usually dead mem stickes are caused 99% by removing themwith out first clicking Eject on same. first.