20 Most Recent Samsung CLX 3160fn All-In-One Printer - Page 3 Questions & Answers

You may download the driver from the K-M site at http://www.biz.konicaminolta.com/technologies/upd/spec.html

Clean the laser scanner window and the primary corona wire on the drum unit.

HI are you in the usa or the u.k. ? If its the USA, 110v, if its the U.K.220v is the right one , Markus.

Hi ...

IN CLX 2160, paper jams usually occur in three areas of a printer. The following error messages indicate the area in which the jam has occurred:

• Jam 0 indicates the paper failed to pass through the first sensor.
• Jam 1 indicates the paper failed to pass through the second sensor and has jammed around the toner cartridge.
• Jam 2 indicates the paper failed to pass through the second sensor and has jammed near the fuser.

Your error shows paper jam2 but i am giving you directions to fix the paper jams indicated by each error message so that you can handly any kind of paper jam issue with your printer.
Paper Jam 0 When your printer displays Jam 0, paper has failed to pass through the first sensor.
To remove the jammed paper, follow these steps:

1. Power your printer off.
2. Open the cover of your printer.
3. Gently pull the paper toward you to remove it from the printer. Note: If you do not remove the paper slowly, you can damage the printer and the printer will require service.
   

1. After removing the paper, make sure there is no additional paper in the paper path.
2. Close the printer cover, and then power on your printer.
   

If your printer still displays Jam 0 after you turn on the printer, unplug the printer, and then repeat the steps above. Make sure all paper has been removed and the printer's rollers are in their correct positions. Before turning your printer back on, make sure all the cover doors are fully closed.
Paper Jam 1 When your printer displays Jam 1, the paper has failed to pass through the second sensor and has jammed around the toner cartridge.
To remove the jammed paper, follow these steps:

1. Power your printer off.
2. Open the cover of your printer.
3. Gently pull the paper toward you to remove it from the printer. Note: If you do not remove the paper slowly, you can damage the printer and the printer will require service.
   

1. After removing the paper, make sure there is no additional paper in the paper path.
2. Close the printer cover, and then power on your printer.
   

If your printer still displays Jam 1 after you turn on the printer, unplug the printer, and then repeat the steps above. Make sure all paper has been removed and the printer's rollers are in their correct positions. Before turning your printer back on, make sure all the cover doors are fully closed.
Paper Jam 2 When your printer displays Jam 2, the paper has failed to pass through the second sensor and has jammed at the fuser.
To remove the jammed paper, follow these steps:

1. Power your printer off.
2. Open the cover of your printer.
3. Gently pull the paper toward you to remove it from the printer. Note: If you do not remove the paper slowly, you can damage the printer and the printer will require service.
   

1. After removing the paper, make sure there is no additional paper in the paper path.
2. Close the printer cover, and then power on your printer.
   

If your printer still displays Jam 2 after you turn on the printer, unplug the printer, and then repeat the steps above. Make sure all paper has been removed and the printer's rollers are in their correct positions. Before turning your printer back on, make sure all the cover doors are fully closed.

Please vote if this helps ... Cheers :)

could be the fusser, some bad wheels , but if the paper comes out good, there's no major problem

Try cleaning the 4 connectors - and the connector on the machine. Sounds as the though the information about the cartridge is not getting through to the machine. Use an electronic contact cleaner !