20 Most Recent Sharp Aquos LC-42D62U 42 in. LCD HDTV - Page 5 Questions & Answers

Is there TV & Set Top Box connected properly of HDMI Cable defective.

I'm happy with:

backlight +16
contrast +40
brightness +1
colour -13
tint 0
shaprness +2

although I found this setup but haven't tried it yet

backlight +5
contrast +24
brightness -7
colour +50 (review I found didn't say + or -. Try both
tint 0
sharpness -5

Len

0286,0261. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes used for devices too are given, in the order of device brand name list in alphabetical order. Pull up older posts. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

i have a sharp lc-42sb55e and it has 2 kind of problem which are rotate each other. 1. problem: suddenly turn itself off and after 1 second it turn on itself and it repeat for a long time and once it suddenly ends. first i thought it is overheated, but it makes it when i turn it on after a day too. 2. problem: suddenly it start swiching betveen the plug ins (HDMI 1, HDMI2, HDMI3 PC, TV, SCART 1...) rapidly. once it sudenly ends. zesterday it made it for 3 hour. i hope u cane give me some solution, thank u

Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do asearch by type in the brand name of your device at its search box. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis.

Bad LCD Panel very expensive to fix. if it is under warranty or if you bought an extended warranty use it to have the set fixed.

Volume level might be locked. You have to enter its service mode option to set the [preset] volume level. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

To reset it to factory settings, you have to enter its service mode option. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

You would need a driver written by Sharp, if one was ever written for it, which I doubt. .

it must be a problem with the router box what is your tv servace what is your provider (dish charter tds etc.)