20 Most Recent
Polaroid FLM-3734B 37 in. LCD HDTV - Page 9 Questions & Answers
How do i get back to AV1 on my TV?
if av1 has stopped working and all others are still working then it is a problem with the switching IC or interface ic so you will need to reploace the mainboard you can try shopjimmy.com or partsearch.com
12/10/2009 2:35:46 PM •
Polaroid...
•
Answered
on Dec 10, 2009
POWERS UP BUT NO PICTURE OR SOUND WILL NOT SHUT
my POlaroid 37" did same thing blue light stayed on no pic or sound was 2 electrolytic caps on power supply board took back off and they were noticably bulged at top radio shack sells these caps at $3 apiece fixed mine works like new saw a video on here how to do it
12/9/2009 8:22:57 AM •
Polaroid...
•
Answered
on Dec 09, 2009
We had the tv and had a stereo plugged into it for
Go to your menu button and go to sound set up and turn your sound back on some times if tvs no there are other sounds it will shut off the speakers also if you look in the back sometimes there is a sund botton
12/9/2009 3:59:31 AM •
Polaroid...
•
Answered
on Dec 09, 2009
I stay in acworth ga and i need a power cord for
Most power cords for TVs have become universal so to speak, just note whether your TV has 2 or 3 prongs on the back where the cord attaches to the TV, then you should beable to find it locally at places such as, Walmart,Radio Shack,Best Buy,Sears, most electronics stores. Good Luck !
12/2/2009 7:50:10 PM •
Polaroid...
•
Answered
on Dec 02, 2009
TV wont power on unless I unplug the unit and wait
wiil the set function ok after you do this? if so you will need a mainboard replacement if not then power board may have a bad capacitor on it the can shpe cap will have a domed top the values are on the side have it replaced or do it your self if your able
11/29/2009 3:38:34 PM •
Polaroid...
•
Answered
on Nov 29, 2009
When we turn on the tv there is no sound coming
Let verify first to narrow down to where the problem can be. First, attach the powered PC speakers to the Audio Line out RCA jacks to see if you can get the sound OK there, if you do, then the problem can be in the power amp circuits, if the sound at RCA jacks is not OK, then the problem can be in the sound processor circuit.
You can download the service manual here: http://www.polaroidsupport.com/polaroid/en_us-sm.html
Please post back what you find.
11/24/2009 6:56:53 AM •
Polaroid...
•
Answered
on Nov 24, 2009
My dad's polaroid flat screen will not power up
you have a bad cap in the power supply board these can like devices will have a puffed up top and the values are on the side of them change them or it out and you will be good to go
11/19/2009 4:23:51 PM •
Polaroid...
•
Answered
on Nov 19, 2009
Sound got scratchy then tv
Hi
Thanks for using FixYa. The
reason of scratchy sound is due to high voltage. Please check the
swollen/bulged capacitors. This issue arises due to failed capacitor in the
power supply or an IC.
If you are well versed in electronics and have proper tools, you can diagnose, test
and replace the swollen or bulged capacitors in the power supply. If still the
issue persists, then you’ll need to replace 1000uf 35v which you can buy from
the Radio Shack or any other nearest parts store.
Please do accept the solution if the issue is resolved or
else revert for further assistance.
Thanks
Rylee
11/14/2009 11:47:28 AM •
Polaroid...
•
Answered
on Nov 14, 2009
Not finding what you are looking for?