my copy machine xerox has an error message lsu, what can i do to resolve it
LSU indicates a laser problem.
What is the model number? I can give you more information with the proper model number.
Thanks.
Posted on Dec 31, 2007
hope get instruction by phone walk through the process
i have a lexmark printer x 2500 installed in vista but will not print why will it not work, it will make copys but not print from my pictures or anything on my computer,
Posted on Sep 25, 2008
It displays error code 09,038,46:21303. I have removed the black ink, but the error is still there. Any solutions.
When you service a Phaser 8500 or 8550 printer for:
· a persistent Ink Out message
· 9,035.43 Cyan Ink Stick Count Fault
· 9,036.44 Magenta Ink Stick Count Fault
· 9,037.45 Yellow Ink Stick Count Fault
· 9,038.46 Black Ink Stick Count Fault
Test the Ink Out Sensors for proper operation.
Inspect the Ink Sticks.
Posted on Apr 10, 2008
The print warms until 40% and then shows the message. I have read somewhere that is a something with printhead position.
I have checked 1.Printhead
2.Whiper Drives , and clutch.
Ameally out of ideas what migth be.
There is a print block located on the left side of the machine looking from the front. It is near the bottom of the machine, Staineless steel, about 1 inch square.
It normally has ink in it and causes the print head to pivot slow.
You have to pull the spring holder up and to the left, remove that block and clean it well. That should resolve your problem.
You want to remove as much excess around the block as you can.
Posted on May 07, 2008
LSU ERROR DISPLAYED FOR XEROX WORKCENTRE PE220
Hi Dear
I am facing LSU Error on my Xerox workstation PE 220
I am not able to do anything, please let me wat to do
i have lot of work penindg
urs
mujahid
Posted on Oct 13, 2008
the lamination paper is stuck. never went thru the other side. How do I open it and un jam it? Please help ITS THE XEROX XRX-951L laminator. I couldn't find t n your list
you need to use the carrier (cardboard cover) that the lamination paper comes with.. if you dont use the carrier your plastic will stick to the hot rollers... you will need to take it apart and clean out the plastic.. easy to dow hen it is cold peels off easily... pain in the neck getting it back together as the wires in the front interfere with the front screw post...
Posted on Jan 15, 2009
Hi.
Word docs are fine, but if I want to print a glossy brochure off the internet the out of memory sign is printed instead. Can anyone help?
Thanks
Alex
Try setting the page scaling to "None". Worked for me.
Posted on Apr 07, 2011
i have this printer error: 09, 038, 46: 15112 on my screen. i've tried unplugging the machine but to no avail. i have no idea what the actual problem is, nor the circumstances surrounding the problem as i've not been in the office in several days.
anyone have an idea what to do?
Yep. One of your ink sticks is stuck in the ink loader and not advancing down to the bottom of the ink loader.
Look where you add the sticks, I think off hand that .46 means its a black stick, but anyway, one stick is broken, cracked, twisted or otherwise for some reason not sliding down the loader.
If you have to remove them, take a screw, a drywall screw is best to twist into the ink block and slide it back and out to reload.
Posted on Dec 21, 2008
The PE220 workcenter shows Toner Low message first. I pulled the csartridge out and pushed it back, then the Lsu Error message appears.
XEROX WORKCENTER PE220 , ITS SHOWING LSU ERROR . ITS NOT PRINTING OR COPYING ANYTHING . PLEASE GIVE SOLUTION
Posted on Jan 24, 2011
127-211 ERROR CODE
check below link
http://download.support.xerox.com/pub/docs/P_4110EPS/userdocs/any-os/en/4110-4590eps_ug.pdf
Posted on Jun 16, 2011
548 questions posted
Usually answered in minutes!
284 Questions
262 Questions
152 Questions
147 Questions
158 Questions
