Pelican Products 9430 - Products 9430-B Remote Area Lighting System, Black - Page 10 - Answered Questions & Fixed issues

page 6 and 7 Intelli-Time ® clock and calendar are pre-programmed to the correct time and date, and update automatically for Daylight Saving Time. All you need to do is select your time zone using the "ZONE" button https://www.acurite.com/media/manuals/13020-13026-instructions.pdf

https://www.manualslib.com/manual/841274/Jlr-Gear-Smart-Gear.html

You will need to send this expensive meter to Fluke for repair, any Snap-On tool dealer can help.

Bar length of what?

This website has no rubic cube.

no good complaining on fixya site as we don't make or sell anything far better for you to contact the manufacturer direct

Check eBay or Amazon.

Hi check if you're spark plugs are the correct heat range....check air cleaner try giving the motor a compression leak test if this doesn't work the carburettor probably needs a good clean .cheers.

I have no idea what this 1099RX is.

Hello, Larry - To answer your question you need to indicate the make and model of your anemometer (the name for the device which measures wind speed.) You can add that information by clicking or tapping on Comment and typing in the information. Perhaps you can find your anemometer here: https://www.grainger.com/category/air-velocity-meters-and-anemometers/air-movement/test-instruments/ecatalog/N-b83 or here: https://www.weathershack.com/category/anemometers.html Best wishes.

replacement/additional radio sensors can be bought via https://www.teknihall.be/en/node/544

https://www.davisinstruments.com/resources/weather-monitoring/#support Look for your model number. The issue is setting the ISS to the right channel and then setting the console to find it.

Hi yes set the dial to 600 on the DC voltage for 275 Volts DC::: 2000m to 600 Volt DC ::::: dial in photo is pointing to DC voltage.:::::::.black 200 to 500 is AC voltage ::::: right hand side is Ohm's resistance .200 ohm to 2000K- Ohm ..1k-ohm=1000.Ohms.....cheers

Who makes that unit? A reading of that temperature usually means that the sensor is bad.

there are no replacement parts on system time for a new one.$29.00 on amazon.

http://www.comdac.com/literature/generac/0c8221.pdf

Go to ; https://www.manualslib.com/manual/516295/La-Crosse-Ws-9520u.html You can downlaod the pdf file then and save or print the manual whichever you prefer.

Hello, Denise - I have not found a manual online for the Eddie Bauer Radio Controlled Weather Station 802R25 yet. Therefore, I suggest you contact the Eddie Bauer company directly and ask about the availability of an owner's manual / instructions for that model of weather station. See the Contact Us information for Eddie Bauer here: http://www.eddiebauer.com/custserv/customer-service-landing.jsp The Customer Service contact information will be found in a far right column. Note: Even if that model is no longer being manufactured, ask if a manual for that model is in the company Archives and ask if a copy can be scanned as a PDF document (Adobe Acrobat Reader software - free) for you. There may be a cost for a manual. Best wishes.

Either the meter is faulty or the circuit - try using a different meter and testing a different circuit with the Fluke. Perhaps you aren't using the Fluke correctly and reading the instructions could be a good idea...

https://www.lacrossetechnology.com/support/?type=manuals That does not appear to be the whole model number